Abstract:Organic–inorganic metal halide perovskite materials have been widely studied as the light absorber for efficient photovoltaics. However, perovskite layers with defective nature are typically prepared with an uncontrollable crystallization process, intrinsically limiting further advance in device performance, and thus require delicate manipulation of crystallization processes and defect density. Here, we demonstrate an ammonium-assisted crystallization of perovskite absorbers during a two-step deposition to fabricate efficient solar cells. Addition of ammonium iodide (NH4I) is devised to manipulate the nucleation and crystal growth of perovskite, wherein the formation and transition of intermediate x[NH4+]•[PbI3]x− enables high-quality perovskite layers with an enlarged grain and reduced defect density. As a result, the perovskite solar cells (PSCs) achieve an average efficiency of 21.36% with a champion efficiency of 22.15% and improved environmental stability over 30 days in ambient conditions with varied relative humidity. These results with addition of NH4I provide an available and ingenious way to construct high-quality perovskite layers for efficient solar cells and will advance the commercial application of perovskite-based photovoltaics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05903?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05903</a>.Experiment method; (Figure S1) SEM images, (Figure S3) absorption, (Figure S4) PL and TRPL of the perovskite layer with different concentrations of NH4I; (Figure S2) XRD and SEM images of PbI2 with or without NH4I; (Figure S5 and Table S1) photovoltaic parameter distribution of PSCs with different concentrations of NH4I; (Figure S6) PCE distribution and MPP tracking of PSCs with and without NH4I addition; (Figure S7 and Table S2) photovoltaic parameter distribution of PSCs with NH4I added on different functional layers; (Figure S8) fitted dark J–V; and (Table S3) fitted parameters of EIS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05903/suppl_file/am1c05903_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly reproducible perovskite solar cells via controlling the morphologies of the perovskite thin films by the solution-processed two-step method

Reproducible One-Step Fabrication of Compact MAPbl(3-x)Cl(x) Thin Films Derived from Mixed-Lead-Halide Precursors

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Improving the Efficiency of Perovskite Solar Cells Through Optimization of the CH 3 NH 3 PbI 3 Film Growth in Solution Process Method

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

New Low-Temperature Solution Processes to Control the Formation of Perovskite Films for Achieving High Performance Solar Cells

Spontaneously supersaturated nucleation strategy for high reproducible and efficient perovskite solar cells

A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells

Facile Face-Down Annealing Triggered Remarkable Texture Development in CH3NH3PbI3 Films for High-Performance Perovskite Solar Cells.

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Controllable Grain Morphology Of Perovskite Absorber Film By Molecular Self-Assembly Toward Efficient Solar Cell Exceeding 17%

Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%

Application of Cesium on the Restriction of Precursor Crystallization for Highly Reproducible Perovskite Solar Cells Exceeding 20% Efficiency

Efficient Perovskite Solar Cells Fabricated Through CsCl-Enhanced PbI2 Precursor Via Sequential Deposition.

Manipulated Crystallization and Passivated Defects for Efficient Perovskite Solar Cells via Addition of Ammonium Iodide

Morphology-controlled CH3NH3PbI3 films by hexane-assisted one-step solution deposition for hybrid perovskite mesoscopic solar cells with high reproductivity

Planar Heterojunction Perovskite Solar Cells Via Vapor-Assisted Solution Process

One-Step Printable Perovskite Films Fabricated under Ambient Conditions for Efficient and Reproducible Solar Cells

Precursor Solution Annealing Forms Cubic‐Phase Perovskite and Improves Humidity Resistance of Solar Cells

Two-step deposition method for high-efficiency perovskite solar cells

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell