Abstract:This study experimentally investigates the law and mechanism about the cavitation and bearing capacity of journal bearing with micro-texture. Numerical simulations and experiments are used in this paper to systematically research the influences on lubrication performance of journal bearing friction pair, which caused by the different distributions of texture on bearing surface and the different bearing speeds. The results show that the distribution of the texture has an obvious influence on the lubrication performance of the friction pair due to affecting macro-cavitation distribution besides local hydrodynamic effect. When the texture is arranged in the main loading area of bearing surface, the frictional coefficient increases and the lubrication performance decreases compared with that without texture. However, when the texture is arranged in the inlet area and the outlet area, the frictional coefficient reduces and the lubrication performance improves effectively, and the effect is the most obvious for the texture arranged in the outlet area. Moreover, when the texture is arranged in the outlet area, with the increase of bearing speed, the areas of macro-cavitation in the outlet area become larger, compared with when the texture in the inlet area. The bearing with texture at outlet surface can obtain best lubricating performance, because the marco-cavitation is obvious and oil film area decreases relatively, which leads to lower frictional coefficient between the interfaces.

Visualization Investigation On Flow Field Of Journal Bearing With Partial Texture Surface

Effects of Lubricant Viscosity-Temperature Relationship on the Capacity of Sliding Bearing

Experimental investigation for vibration reduction of surface-textured journal bearings

Investigation on Inner Flow Field Characteristics of Groove Textures in Fully Lubricated Thrust Bearings

Lubrication and stability analysis of nonlinear rotor-bearing system

Prediction on Flow and Thermal Characteristics of Ultrathin Lubricant Film of Hydrodynamic Journal Bearing

Effect of Micro-texture on Cavitation Distribution of Journal Bearing Friction Pair

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Effects of Surface Texture on Turbulent Lubrication of Water-lubricated Journal Bearing

Direct Observation of Cavitation Phenomenon and Hydrodynamic Lubrication Analysis of Textured Surfaces

Thermo-hydrodynamic analysis of large-eccentricity hydrodynamic bearings with texture on journal surface

Research on Internal Flow Field Characteristics of Straight-Groove Texture Using Three-Dimensional Modeling

Investigation of the Effect of Cavitation and Journal Whirl on Static and Dynamic Characteristics of Journal Bearing

Thermohydrodynamic Analysis of Journal Bearings Lubricated with Couple Stress Fluids

A New Dynamic Mesh Algorithm for Studying the 3D Transient Flow Field of Tilting Pad Journal Bearings

Influence of Slip Effect on Viscous Dissipation Heat and Lubrication Characteristics of Gas Journal Bearing: A Multiscale Analysis

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Effect of effective viscosity on characteristics of microscale gas journal bearings

Study of grease lubricated journal bearing with partial surface texture

A Study of A Journal Bearing Lubricated by Couple Stress Fluids Considering Thermal and Cavitation Effects

Theoretical and experimental study on influences of surface texture on lubrication performance of a novel bearing