Abstract:One multisilicon copolymer, i.e. a copolymer containing pendent siloxane and anhydride groups is prepared from the copolymerization of maleic anhydride (MA) and methacryloxypropyl trimethoxy silane (gamma-MPS). Thereafter, it is used for the preparation of hybrid membranes through in situ sol-gel process in poly(vinyl alcohol) (PVA) solution. The anhydride groups in MA are less hydrophilic as compared with acidic carboxylic acid (-COOH) groups. Hence the copolymerization process can be more easily controlled without formation of gel. During the sol-gel process, the anhydride groups hydrolyze to generate geminal -COOH groups, which provide the membranes with relatively high cation exchange capacities (CECs) that can be applied for the diffusion dialysis process to recover NaOH from the mixture of NaOH/Na2WO4. The membranes have the initial decomposition temperature (IDT) of 227-243 degrees C, tensile strength (TS) of 14.2-28.3 MPa and elongation at break (E-b) of 18.8-67.3%. In addition, water swelling decreases as the content of multisilicon copolymer increases despite the increasing of the IEC values, which is attributed to the gradually strengthened crosslinking between PVA and the copolymer components. At 20 degrees C, U-OH (the dialysis coefficients of OH- ions) are in the range of 0.0095-0.0123 m/h, and the separation factor (S) values are in the range of 28.4-54.4. The U-OH values are significantly higher than the values of the commercial membrane (0.00137 m/h) and other polymer based hybrid membranes (0.0014-0.0022 m/h). This is due to the unique membrane structure and the presence of different functional groups. PVA provides hydrophilic matrix and hence the membranes cannot be classified into the common "three-phase" structure membranes. The presence of -OH groups assists and enhances the transport of OH- ions. (C) 2012 Elsevier B.V. All rights reserved.

Development of Pva/Mida Based Hybrid Cation Exchange Membranes for Alkali Recovery Via Diffusion Dialysis

Cation exchange hybrid membranes based on PVA for alkali recovery through diffusion dialysis

Pva-Based Hybrid Membranes From Cation Exchange Multisilicon Copolymer For Alkali Recovery

Poly (aryl Ether Ketone)/polymeric Ionic Liquid with Anisotropic Swelling Behavior for Anion Exchange Membranes

Crosslinked Pva-Based Hybrid Membranes Containing Di-Sulfonic Acid Groups for Alkali Recovery

Carboxylic acid type PVA-based hybrid membranes for alkali recovery using diffusion dialysis

A Simple and Green Preparation of Pva-Based Cation Exchange Hybrid Membranes for Alkali Recovery

Cation Exchange PVA/SPPO/SiO2 Membranes with Double Organic Phases for Alkali Recovery

Imidazolium Functionalized Anion Exchange Membrane Blended with Pva for Acid Recovery Via Diffusion Dialysis Process

Fabrication of Cation Exchange Membrane from Polyvinyl Alcohol Using Lignin Sulfonic Acid: Applications in Diffusion Dialysis Process for Alkali Recovery

Double Cross-Linking PVA-SiO2 Hybrid Membranes for Alkali Recovery

Anion exchange hybrid membranes from PVA and multi-alkoxy silicon copolymer tailored for diffusion dialysis process

Zwitterionic Multisilicon Copolymer Used for Preparing PVA Based Hybrid Membranes for Alkali Recovery

Preparation of cation-exchange hybrid membranes with multi-functional groups and their performance on alkali recovery

In-situ crosslinked SPPO/PVA composite membranes for alkali recovery via diffusion dialysis

Cation exchange hybrid membranes prepared from PVA and multisilicon copolymer for application in alkali recovery

Alkali recovery using PVA/SiO2 cation exchange membranes with different -COOH contents.

Novel Silica-Functionalized Aminoisophthalic Acid-Based Membranes for Base Recovery Via Diffusion Dialysis

Development of Novel PVA-QUDAP Based Anion Exchange Membranes for Diffusion Dialysis and Theoretical Analysis Therein

A simple method to prepare anion exchange membrane by PVA/EVOH/MIDA for acid recovery by diffusion dialysis

Novel quaternized aromatic amine based hybrid PVA membranes for acid recovery