Abstract:Magnetic nanoparticles (MNPs) modified simultaneously with amorphous Fe and Mn oxides (Mag-Fe-Mn) were synthesized to remove arsenite [As(III)] from water. Mag-Fe-Mn particles were fabricated through heterogeneous nucleation technique by employing the maghemite as the magnetic core and Fe Mn binary oxide (FMBO) as the coating materials. Powder X-ray diffraction, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and transmission electron microscopy were utilized to characterize the hybrid material. With a saturation magnetization of 23.2 emu/g, Mag-Fe-Mn particles with size of 20 -50 nm could be easily separated from solutions with a simple magnetic process in short time (within 5 min). At pH 7.0, 200 mu g/L of As(III) could be easily decreased to below 10 mu g/L by Mag-Fe-Mn particles (0.1 g/L) within 20 min. As(III) could be effectively removed by Mag-Fe-Mn particles at initial pH range from 4 to 8 and the residual As was completely oxidized to less toxic arsenate [As(V)]. The co-occurring redox reactions between Mn oxide and As(III) was confirmed by XPS analysis. Chloride, sulfate, bicarbonate, and nitrate at common concentration range had negligible influence on As(III) removal, whereas, silicate and phosphate reduced the As(III) removal by competing with arsenic species for adsorption sites. As(M) removal was not obviously affected by natural organic matter (up to 8 mg/L as TOC). Mag-Fe-Mn could be regenerated with ternary solution of NaOH, NaCl, and NaClO. Throughout five consecutive cycles, the adsorption and desorption efficiencies maintained above 98% and 87%, respectively. Mag-Fe-Mn had a larger adsorption capacity for As(III) (47.76 mg/g) and could remove trace As(III) more thoroughly than MNPs modified solely with either Fe or Mn oxide due to the synergistic effect of the coating Fe and Mn oxides. This research extended the potential applicability of FMBO to a great extent and provided a convenient approach to efficiently remove trace As(III) from water. (C) 2013 Elsevier Ltd. All rights reserved.

Removal of Trace Mercury (II) from Aqueous Solution by in Situ MnO(x) Combined with Poly-Aluminum Chloride.

Manganese Removal from Aqueous Solution Using a Thermally Decomposed Leaf

Removal of Thorium and Uranium from Aqueous Solution by Adsorption on Hydrated Manganese Dioxide

Adsorption and catalytic oxidation of gaseous elemental mercury in flue gas over MnOx/Alumina

Efficient Removal of Trace Arsenite Through Oxidation and Adsorption by Magnetic Nanoparticles Modified with Fe-Mn Binary Oxide

Promotion effect of Cu doping on mercury removal properties of magnetic MnFe2O4 materials with high adsorption capacity

The enhanced removal of arsenite from water by double-shell CuOx@MnOy hollow spheres (DCMHS): behavior and mechanisms

Arsenic Removal from a High-Arsenic Wastewater Using in Situ Formed Fe–Mn Binary Oxide Combined with Coagulation by Poly-Aluminum Chloride

Zero-valent manganese nanoparticles coupled with different strong oxidants for thallium removal from wastewater

Facile Synthesis of Manganese Dioxide Nanoparticles for Efficient Removal of Aqueous As(III)

Facile Synthesis of Thiol-Functionalized Magnetic Activated Carbon and Application for the Removal of Mercury(II) from Aqueous Solution

Research on Low-level Hg(II) Removal from Water by the Heavy Metal Capturing Agent

Insights into the synergistic removal mechanisms of thallium(I) by biogenic manganese oxides in a wide pH range

Removal of elemental mercury from flue gas using the magnetic attapulgite by Mn-Cu oxides modification

Removal of Aqueous Pb(Ii) by Adsorption on Al2o3-Pillared Layered Mno2

Use of Hydrous Manganese Dioxide As a Potential Sorbent for Selective Removal of Lead, Cadmium, and Zinc Ions from Water.

Study on mercury adsorption by powdered activated carbon for the heavy metals

Preparation of Chitosan-Graft-Polyacrylamide Magnetic Composite Microspheres for Enhanced Selective Removal of Mercury Ions from Water

Simultaneous oxidation of Mn(II) and As(III) on cupric oxide (CuO) promotes As(III) removal at circumneutral pH

Manganese Removal from the Qiantang River Source Water by Pre-Oxidation: A Case Study

Effective remediation of mercury (II) from aqueous solutions using CS-MnFe2O4-CoS-MWCNTs: Box-Behnken design optimization and adsorption isotherm, kinetics, and thermodynamics evaluation