Abstract:We demonstrated remarkably enhanced 2.7 mu m emission in glass-ceramic (GC) fibers containing NaYF4: Er3+ nanocrystals with 980 nm excitation for the first time. The melt-in-tube technique is of scientific and technical significance for the fabrication of GC fibers in comparison to the conventional rod-in-tube technique. The obtained precursor fibers, in which the structure can be maintained well, exhibit no obvious element diffusion or crystallization during the fiber-drawing process. After a careful heat treatment, NaYF4 nanocrystals were controllably precipitated in the glass fiber core. Owing to the incorporation of Er3+ ions into the low phonon energy NaYF4 nanocrystals, enhanced 2.7 mu m emission was achieved from the Er3+-doped GC fibers, which was almost undetectable in precursor fibers due to the high phonon energy of the borosilicate glass fiber matrix. Moreover, the 2.7 mm emission lifetime was obtained due to the excellent emission properties of Er3+ in the GC fibers. The transmission loss values of precursor fibers and GC fibers at 1310 nm were measured to be 7.44 dB m(-1) and 11.81 dB m(-1), respectively. In addition, a theoretical simulation based on the rate equations and propagation equations was performed to evaluate the possibility of 2.7 mu m laser output. The excellent optical properties endow the GC fibers with potential applications for mid-infrared fiber lasers.

Laser Performance and Material Characters of Commercial Ce/Yb Co-Doped Aluminosilicate Binary Glass Fiber

Yb/Ce Codoped Aluminosilicate Fiber With High Laser Stability for Multi-kW Level Laser

Yb-Doped Aluminophosphosilicate Laser Fiber

Spectroscopic and Laser Properties of Al-P Co-Doped Yb Silica Fiber Core-Glass Rod and Large Mode Area Fiber Prepared by Sol-Gel Method

Enhanced single-mode fiber laser emission by nano-crystallization of oxyfluoride glass-ceramic cores

High ytterbium concentration Yb/Al/P/Ce co-doped silica fiber for 1-μm ultra-short cavity fiber laser application

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

Precisely controllable fabrication of Er3+-doped glass ceramic fibers: novel mid-infrared fiber laser materials

High Water-Resistant and Thermal Stable Fluoride Fibers for Mid-Infrared Laser

Yb3+-doped oxyfluoroborosilicate glasses and glass ceramics containing CaF2 nanocrystals for 981 nm near infrared fiber lasers

Efficient and Broadband Emission in Dy3+-Doped Glass-Ceramic Fibers for Tunable Yellow Fiber Laser

~1 Μm Laser Output Based on Heterogeneous Fiber with Yb3+-doped Fluorophosphate Core and Phosphate Cladding

High-Efficiency Radiation-Balanced Yb-Doped Silica Fiber Laser With 200-mW Output

Optical Properties of Er3+/Yb3+ Co-Doped Bismuth Calcium Borate Glass System for NIR Lasers and Fiber Amplifiers

Intense Continuous‐wave Laser and Mode‐locked Pulse Operation from Yb3+‐doped Oxyfluoride Glass–ceramic Fibers

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

Intense continuous‐wave laser and mode‐locked pulse operation from Yb 3+ ‐doped oxyfluoride glass–ceramic fibers

Novel Er3+/Ho3+‐codoped Glass‐ceramic Fibers for Broadband Tunable Mid‐infrared Fiber Lasers

Fabrication, microstructure and laser performance of Yb3+ doped CaF2-YF3 transparent ceramics

Preparation and Spectroscopic Properties of Yb-doped and Yb–Al-codoped High Silica Glasses