Abstract:Single-crystallization is an effective strategy for enhancing both capacity and stability of Ni-rich LiNi1-xyCoxMnyO2 (NCM) cathode materials, especially at high cut-off voltages. However, the kinetics limitation of solid-phase Li+ diffusion is a major concern because of the long diffusion path in large single-crystal particles. To address this issue, we synthesize a Na-doped single-crystal LiNi0.82Co0.125Mn0.055O2 (NCM-Na) cathode material by a facile mixed-molten-salt sintering process. Na+ is revealed to be uniformly doped at the Li+ lattice sites within the entire single-crystal particles. This Na+ doping effectively enhances the dynamics of Li+ transport in the layered oxide phases. The NCM-Na material with 2 at.% Na doping shows a Li+ diffusion coefficient up to more than 8 times higher than pristine NCM. In-situ X-ray diffraction and finite element analysis demonstrate significantly facilitated H1-H2-H3 phase transition in NCM-Na materials, compared with the severe phase separation phenomenon in NCM counterpart, hoisting their rate capacity and structure stability. Thus, the NCM-Na material achieves a superior reversible capacity of 177.7 mAh/g at 5C, and a capacity retention of 94.4 % after 100 cycles at 0.5C at a high cut-off voltage of 4.5 V. By density function theory calculations, we reveal that Na+ doping can selectively stabilize the surrounding Li+ at the second farthest hexagonal vertexes by tuning the orientation of the Jahn-Teller effect of Ni3+. These Li+ ions frame a high-speed pathway for preferential Li+ diffusion, which promotes the Li+ diffusion kinetics even in highly delithiated states. Our findings provide insights into the Na+ doping mechanism and present a low-cost, highly efficient, and scalable method to enhance the performance of single-crystal Ni-rich NCM materials.

Phase Transition Dominated High-Rate Performances of the High Voltage LiNi0.5Mn1.5O4 Cathode: Improvement on Structure Evolution and Ionic Diffusivity by Chromium Doping

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Optimization of Sr-doping Boosting the Structural Stability for Single Crystalline LiNi0.8Co0.1Mn0.1O2 Cathode to Enhance Its Electrochemical Performance at Elevated Voltage and Temperature

Manipulation of Transition Metal Migration via Cr-Doping for Better-Performance Li-Rich, Co-Free Cathodes

Suppressed Phase Separation in High-Voltage LiNi0.5Mn1.5O4 Cathode Via Co-doping

Stabilizing the Structure of Nickel‐Rich Lithiated Oxides Via Cr Doping As Cathode with Boosted High‐Voltage/Temperature Cycling Performance for Li‐Ion Battery

Effects of Cr3+ Doping on Spinel LiMn2O4 Morphology and Electrochemical Performance

Atomic-Resolution In Situ Exploration of the Phase Transition Triggered Failure in a Single-Crystalline Ni-Rich Cathode

Mitigating the Voltage Decay and Improving Electrochemical Properties of Layered-Spinel Li1.1Ni0.25Mn0.75O2.3 Cathode Material by Cr Doping

Effect Of Chromium And Niobium Doping On The Morphology And Electrochemical Performance Of High-Voltage Spinel Lini0.5mn1.5o4 Cathode Material

Effects of Chromium Doping on Performance of LiNi0.5Mn1.5O4 Cathode Material

Chemical-Mechanical Effects in Ni-Rich Cathode Materials

The Promotion of Phase Transitions for Ni-based Layered Cathode Towards Enhanced High-Voltage Cycle Stability

Enhanced electrochemical performances of single crystal layered LiNi0.5Mn0.5O2 cathode through Na doping

Improvement of the Electrochemical Performance of LiNi 0.33 Mn 0.33 Co 0.33 O 2 Cathode Material by Chromium Doping

Exploring the Origin of Electrochemical Performance of Cr-doped LiNi0.5Mn1.5O4.

Na+ Orientates Jahn-Teller Effect to Tune Li+ Diffusion Pathway and Kinetics for Single-Crystal Ni-rich LiNixCoyMn1-x-yO2 Cathode Materials

Phase behavior tuning enable high-safety and crack-free Ni-rich layered cathode for lithium-ion battery

Addressing Mn Dissolution in High‐Voltage LiNi0.5Mn1.5O4 Cathodes via Interface Phase Modulation

Enhanced Electrochemical Performance of a Ti–Cr-Doped LiMn1.5Ni0.5O4 Cathode Material for Lithium-Ion Batteries