Abstract:In this work, planar perovskite solar cells (PSCs) based on CH3NH3PbI3 perovskite layer and low-temperature processed TiO2 have been fabricated. Polymers including poly(methylmethacrylate) (PMMA), poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-pheny- lenevinylene] (MEH-PPV) and polyethylene glycol (PEG) in chlorobenzene solution have been selected to modify the interface between perovskite and hole transport layer (HTL), respectively. The concentrations of the three polymer solutions have been optimized. The effect of interfacial modification by different polymer solutions on the photoelectric properties of perovskite layer and the performance of PSCs has been systematically investigated. The microstructure and photoelectric properties of the modified perovskite films has been systematically studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), conducting force microscopy (CFM) and Kelvin probe force microscopy (KPFM). The results reveal that the modified perovskite films with tetrahedral perovskite structure have lager grain size, lower roughness and better photoelectric properties compared with the reference sample. The electron trap state density (Dtrap), charge extraction, carrier transfer and recombination process in the PSCs have been investigated by current-voltage (I-V) characteristic curves, steady-state photoluminescence (PL), photo-voltage decay and electrochemical impedance spectroscopy (EIS). The results indicate that the polymeric interface modification at the optimum concentration can reduce the Dtrap, promote the charge transfer and suppress carrier recombination, resulting in the improved performance of PSCs. All of the modified PSCs at an optimum concentration exhibit the improved fill factor (FF) and open circuit voltage (Voc), thus the power conversion efficiency (PCE) is enhanced to over 17% from 15.49%.

Tuning the A-site Cation and X-site Anion Composition of CH3NH3PbI3 Perovskite Material for Efficient Planar Perovskite Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Stable Hole-Free, Carbon-Based CsPbI3 Perovskite Solar Cells Achieving 12.45 %-Efficiency at a Low Temperature with Mn Doping and Excess CsBr Simultaneously

Towards High Performance: Solution-Processed Perovskite Solar Cells with Cu-Doped CH3NH3PbI3

Efficient and Reproducible Ch3nh3pbi3-X(Scn)(X) Perovskite Based Planar Solar Cells

Influence of SCN− moiety on CH3NH3PbI3 perovskite film properties and the performance of carbon-based hole-transport-layer-free perovskite solar cells

High Efficient Planar-Heterojunction Solar Cells Achieved by Using A Smooth Ch3nh3pbi3 Film Via A New Approach of Forming the Pbi2 Nanostructure Together with Strategically High Ch3nh3i Concentration

Optimization of the Photoelectric Properties and Photo-Stability of CH3NH3PbBrXI3-X Films for Efficient Planar Perovskite Solar Cells

Enhanced Performance of CH3NH3PbI3−x Cl X Perovskite Solar Cells by CH3NH3I Modification of TiO2-perovskite Layer Interface

Enhancing the Efficiency of Low-Temperature Planar Perovskite Solar Cells by Modifying the Interface Between Perovskite and Hole Transport Layer with Polymers

High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization.

Anion effect on properties of Zn-doped CH3NH3PbI3 based perovskite solar cells

Enhanced Photovoltaic Performance of CH3NH3PbI3 Perovskite Solar Cells Through Interfacial Engineering Using Self-Assembling Monolayer.

Significant performance enhancement of all‐inorganic CsPbBr 3 perovskite solar cells enabled by Nb‐doped SnO 2 as effective electron transport layer

Multifunctional anion-cation modulation engineering for Sn-Pb perovskite solar cells

Efficient and Stable CH3NH3PbI3-x(SCN)x Planar Perovskite Solar Cells Fabricated in Ambient Air with Low-Temperature Process

Improvement of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) Quality Via DMSO-Molecule-Control to Increase the Efficiency and Boost the Long-Term Stability of 1cm(2) Sized Planar Perovskite Solar Cells

Cesium-Containing Methylammonium Lead Iodide Light Absorber for Planar Perovskite Solar Cells.

Controlling the Intermediate Phase to Improve the Crystallinity and Orientation of Cs3Sb2ClxI9‐x Films for Efficient Solar Cells

Optimizing the working mechanism of the CsPbBr3-based inorganic perovskite solar cells for enhanced efficiency

Enhancing Optical, Electronic, Crystalline, and Morphological Properties of Cesium Lead Halide by Mn Substitution for High‐Stability All‐Inorganic Perovskite Solar Cells with Carbon Electrodes