Abstract:As light and efficient large-span space structures, beam string structures have been widely used since the 1980s. Within them, cables are the main force-bearing component; their level of tension determines the overall stiffness, performance and structural safety of the beam string structures. Real-time monitoring of the cable force during the construction and service periods is an important and effective measure to ensure the safety of the cable structure. At present, the vibration method is widely used in nearly all common engineering practices for cable force identification/monitoring because of its simplicity and efficiency. However, the vibration of the cable segment will be affected by the whole structure, so the cable force-frequency relationship based on the simple single cable model cannot meet the accuracy requirement of cable force identification of the beam string structure. Therefore, in this paper, through finite element simulation and theoretical analysis, a three-stage criterion is proposed to develop a new method for obtaining the local modal information of the tensioned cable segment where the influence of the overall structure is considered. The new method’s performance was compared with the results obtained by the vibration method according to the single-cable model assumption, and the design values of the cable forces. The magnitude of the error in the identification of the tension force of the beam string structure according to the single-cable model was studied to provide a correction method, so that the single-cable model assumption can be used to improve the measuring efficiency and ensure the solution accuracy. The numerical results show the effectiveness of the proposed method. The work of this paper provides a new approach for improving the identification accuracy of the vibration method of a complex cable system such as the beam string structure and is a useful discussion on the vibration method of complex cable systems.

Mode Shape-Aided Tension Force Estimation of Cable with Arbitrary Boundary Conditions

Modal Testing and Detection of Pretension Deviation in a Cable Dome Structure

SHAPE DETERMINATION PROBLEM OF SPATIAL CABLE FRAMES

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

A Novel Approach for Cable Tension Monitoring Based on Mode Shape Identification

Joint Identification of Cable Force and Bending Stiffness Using Vehicle-Induced Cable–Beam Vibration Responses

Monitoring of the Internal Force of the Flexible Components by Vibration Method

In-plane free vibrations of small-sag inclined cables considering bending stiffness with applications to cable tension identification

Assessment of cable tension condition based on optimum cable tension of cable-stayed bridge

Identification of Time-Varying Cable Tension Forces Based on Adaptive Sparse Time-Frequency Analysis of Cable Vibrations

A three-stage criterion method for extracting local vibration modes of tensioned cables in beam string structures

Identification of cable tension through physical models and non-contact measurements

Force Monitoring of Steel Cables Using Vision-Based Sensing Technology: Methodology and Experimental Verification

Tension force identification for cable of various end-restraints using equivalent effective vibration lengths of mode pairs

Tension prediction for straight cables based on effective vibration length with a two-frequency approach

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Frequency-based tension assessment of an inclined cable with complex boundary conditions using the PSO algorithm

Smart wireless tension force monitoring system for stay cables

Development of a Low-Cost Automated Tension Estimation System for Cable-Stayed Bridges

Development of an Automated Wireless Tension Force Estimation System for Cable-Stayed Bridges

Research on the Dynamic Characteristics of Cables Considering the Constraints at Both Ends of the Cables