Abstract:Due to their excellent high-temperature strength, and good oxidation resistance, Ni(3)Albased alloys have long attracted considerable interest as a class of high-temperature structural material. These properties, combined with their unique high thermal conductivity, make them ideal for special applications, such as blades in gas turbines and jet engines. However, polycrystalline Ni3Al alloys show almost no ductility and extremely low fracture resistance at ambient temperatures. Ni3Al alloys with the high ductility at room-temperature can be adjusted by the microstructure through directional solidification (DS) and matching. It has been shown that the electric field can refine the solidification structure, reduce the dendrite spacing, promote the diffusion and change the solute redistribution in the solidification process. In order to improve the room temperature ductility of Ni3Al alloy, the effect of current intensity on microstructure of DS Ni-25Al alloy is investigated. In this work, the effects of constant current intensity and NiAl phase on the microstructure are researched. The results show that in the DC electric field, as the result of the aggregation of current along dendrite tip and the Joule heat at the tip of dendrite, the primary dendritic spacing (lambda) decreases with the increasing of current intensity. And the solid-liquid interface tends to be straight resulting from the Joule heat and Peltier effect caused by the segregation of current and the difference in conductivity between solid and liquid interface. When no direct current is applied the DS samples contain the L12 structure of Ni3Al matrix and B2 structure of NiAl precipitate phase. The microstructure is a duplex structure which consist of gray Ni3Al matrix and black NiAl precipitates. NiAl precipitates with regular shape and has obvious orientation along with the growth direction. When the DC current is applied, NiAl precipitates is irregular and dispersion and has no obvious directionality, due to Joule heat effect generated by the current effect, the undercooling increased and the precipitated NiAl phase transformed into thin martensite NiAl phase with twin crystal symmetry from the NiAl-B2 type structure.

Effect of Electromagnetic Field on Microstructure of Ni-Based Single Crystal Superalloys

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

Effect of Horizontal Magnetic Field on the Microstructure of Directionally Solidified Ni-Based Superalloy

Effects of Super-gravity Field on Solidification Structure and Microhardness of Al-Ni-Cr Alloy

Research Progress in Effect of Static Magnetic Field on Microstructure of Directionally Solidified Ni-based Superalloy

Magnetic Field-Dependent Microstructure Evolution of Solidified Co39.2Ni39.2Al21.6 Eutectic Medium-Entropy Alloy

Influence of Cooling Scenarios on the Evolution of Microstructures in Nickel-Based Single Crystal Superalloys

EBSD Study on the Effect of a Strong Axial Magnetic Field on the Microstructure and Crystallography of Al-Ni Alloys During Solidification

Solidification Characteristics of Special Alloys under Alternating Magnetic Field

Phase Field Simulation of Alloying Element Segregation During Solidification of DD5 Nickel-Base Single Crystal Superalloy

Effect of Current Intensity on Microstructure of Ni3Al Intermetallics Prepared by Directional Solidification Electromagnetic Cold Crucible Technique

Influence of an Axial Magnetic Field on Microstructures and Alignment in Directionally Solidified Ni-based Superalloy

Effect of Electromagnetic Field on Microstructure and Mechanical Property for Inconel 625 Superalloy

Directional Solidification Microstructure of a Ni-Based Superalloy: Influence of a Weak Transverse Magnetic Field

Effects of Multi-electromagnetic Field on the Solidification Structure of IN100 Superalloy Castings

Experimental Study on the Micro-Mechanical Parameters of Ni-based Single-Crystal Superalloys Using Nanoindentation and Element Distribution Analysis

Influence of Melt Superheating Time on the Solidification Microstructure of Dd3 Single Crystal Superalloy

Effect of Melt Superheat Treatment on Solidification Behavior and Microstructure of New Ni–Co Based Superalloy

Effect of Electromagnetic Melt Treatment Near Liquidus on the Formation of Non-Dendrite Microstructure of Superalloy

Constitutional supercooling and corresponding microstructure transition triggered by high magnetic field gradient during directional solidification of Al-Fe eutectic alloy

Improvement in creep life of a nickel-based single-crystal superalloy via composition homogeneity on the multiscales by magnetic-field-assisted directional solidification