Abstract:Thick high-strength steel plates are increasingly being used for ship structures. Moreover, hydrogen enters the process of manufacturing and service, and large residual tensile stress occurs near the weld. Such stress can facilitate the diffusion and accumulation of hydrogen in the material, leading to hydrogen embrittlement fracture of the shell. Therefore, residual-stress-induced diffusion and accumulation of hydrogen in the stress concentration region of thick butt-welded high-strength steel plate structures need to be studied. In this study, manual metal arc welding was realized by numerical simulation of residual stress in a thick butt-welded high-strength steel plate model using the thermoelastic–plastic theory and a double ellipsoidal heat source model. To analyze residual stress, a set of numerical simulation methods was obtained through comparative analysis of the test results of relevant literature. Residual and hydrostatic stress distributions were determined based on these methods. Then, hydrogen diffusion parameters in each region of the model were obtained through experimental tests. Finally, the results of the residual stress field were used as the predefined field of hydrogen diffusion to conduct a numerical simulation analysis. The distribution of hydrogen diffusion under the influence of residual stress was obtained based on the theory of stress-induced hydrogen diffusion. The weak area of the welding joint was found to be near the weld toe, which exhibited high hydrostatic stress and hydrogen concentration. Further, the maximum hydrogen concentration value of the vertical weld path was approximately 6.1 ppm, and the maximum value of the path parallel to the weld centerline and 31 mm away from the weld centerline was approximately 6.22 ppm. Finally, the hydrostatic tensile stress in the vertical weld path was maximized (~345 MPa), degrading the material properties and causing hydrogen-related cracking. Hence, a reliable method for the analysis of hydrogen diffusion according to residual stress in thick high-strength steel plates was obtained. This work could provide a research basis for controlling and eliminating the adverse effects of hydrogen on the mechanical properties of ship structures and ensuring the safe service of marine equipment.

Hydrogen Diffusion Mechanism of the Single-Pass Welded Joint in Welding Considering the Phase Transformation Effects

Formation Mechanism of Hydrogen-Induced Delayed Cracking in Weld Center of High-Strength Steel

In-depth Understanding in the Effect of Hydrogen on Microstructural Evolution, Mechanical Properties and Fracture Micro-Mechanisms of Advanced High-Strength Steels Welded Joints

Effect of Residual Stress on Hydrogen Diffusion in Thick Butt-Welded High-Strength Steel Plates

Effect of Residual Stress on Hydrogen Diffusion in Flat Butt Welding Joints

Hydrogen diffusion simulation of the X80 pipeline steel girth weld zone considering the synergistic effect of the structure–stress–concentration field

Effect of Microstructure Inhomogeneity on Hydrogen Diffusion in 2.25Cr1Mo0.25V Welded Joints

Finite Element Simulation of the Effect of Welding Residual Stress on Hydrogen Diffusion

Interaction Between Dislocations, Precipitates and Hydrogen Atoms in a 2000 MPa Grade Hot-Stamped Steel

Influence of physical properties of weld metal on hydrogen diffusion into the heat affected zone of heterogeneous welded joints

3-D Finite Element Analysis of the Effect of Welding Residual Stress on Hydrogen Diffusion in Hydrogen Contained Environment

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Hydrogen Embrittlement Behavior and Mechanism of Low Carbon Medium Manganese Steel Gas Metal Arc Welding Joints

Measurement and Analysis of the Diffusible Hydrogen in Underwater Wet Welding Joint

Numerical Simulation of Hydrogen Diffusion in Low Alloy Steel Welded Joint under Wet H2S Environment

Towards a Better Understanding of Hydrogen-Assisted Cracking in Multiphase Stainless Steel

Numerical Simulation of Hydrogen Diffusion under Welding Residual Stress

Insight into Hydrostatic Pressure Effects on Diffusible Hydrogen Content in Wet Welding Joints Using In-Situ X-ray Imaging Method

INVESTIGATION OF HYDROGEN DIFFUSION CHARACTERISTICS OF THE HEAT AFFECTED ZONE OF 2.25CR-1MO-0.25V STEEL BY AN ELECTROCHEMICAL PERMEATION METHOD

Experimental and Modeling Analysis of Hydrogen Motion Behavior in Welding Zone of 2.25Cr–1Mo–0.25 V Steel Welded Joint with Hydrogen Corrosion

Hydrogen transfer behavior and hydrogen affected zone formation of low alloy steel during thermoplastic deformation