Experimental Investigation of Heat Transfer Characteristics in a Miniature Flat Heat Pipe with Multi-Channels
Stephen Manova,J. Pradeep Kumar,Lazarus Godson Asirvatham,Appadurai Anitha Angeline,Witsawat Leunanonchai,Thana Arkadumnuay,Mehrdad Mesgarpour,Omid Mahian,Somchai Wongwises
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2023.125066
IF: 5.2
2023-01-01
International Journal of Heat and Mass Transfer
Abstract:The heat transfer characteristics of a miniatured flat heat pipe (MFHP) with multi-channels, featuring a port diameter of 1.18 mm, is investigated experimentally. Various operating parameters are considered, including the working fluid volume (Vf = 1.5, 2.5, and 3.5 ml), length of the liquid reservoir (Lres = No reservoir, 5, and 10 mm), orientation such as axial face (alpha a) or lateral side (alpha l), inclination angles (alpha =-15 to 90o), and cooling water flow rates (mi = 10, 15, and 20 LPH). Based on the experiments, the optimal values for the working fluid volume, reservoir length, and flow rate are determined as Vf = 2.5 ml, Lres = 5 mm, and mi = 20 LPH, respectively. Further analysis reveals that, the heat dissipation rate for the axial face is significantly higher than that of the lateral side, with an average percentage increase of 35.4 %. However, the lateral side outperforms the axial face in terms of stabilizing the evaporator wall temperature, reducing fluctuations by an average of 24.5 %. Moreover, the presence of multi-channels allows the MFHP in axial face orientation to dissipate a maximum heat load of 15 W against gravity at an inclination angle of alpha a = -15o. Finally, the variations in MFHP operation based on the orientation and its underlying physical mechanisms that contribute to enhancing heat transfer are discussed.