Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Effects of the Shapes of BaTiO3 Nanofillers on PEO-based Electrolytes for All-Solid-state Lithium-Ion Batteries

Effects of lithium salts on PEO-based solid polymer electrolytes and their all-solid-state lithium-ion batteries

The Effects of the Size and Content of BaTiO 3 Nanoparticles on Solid Polymer Electrolytes for All-Solid-state Lithium-Ion Batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Synergistic effect of Ti3C2Tx MXene/PAN nanofiber and LLZTO particles on high-performance PEO-based solid electrolyte for lithium metal battery

Poly (ethylene oxide) based solid polymer electrolyte improved by multifunctional additives of poly (acrylamide) and LiI

Effect of Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 Fillers on the Interfacial Properties between Composite PEO-LiTFSI Electrolytes with Li Metal during Cycling

Effect of titanium dioxide and zinc oxide fillers on morphology, electrochemical and mechanical properties of the PEO-based nanofibers, applicable as an electrolyte for lithium-ion batteries

PEO kaolinite intercalation interface accelerates lithium-ion transfer for all-solid-state lithium metal batteries

Tailored High Cycling Performance in a Solid Polymer Electrolyte with Perovskite-Type Li0.33La0.557TiO3 Nanofibers for All-Solid-state Lithium Ion Batteries

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes via Incorporation of POSS-PEG 13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

Composite polymer electrolyte incorporating WO3 nanofillers with enhanced performance for dendrite-free solid-state lithium battery

Engineering Ion Conduction Nanodomain Spacing and Interface Environment for Ultrastable All‐Solid‐State Lithium Metal Batteries

(Best Poster Award - 1st Place) Characterisation of the Li Metal|Electrolyte Interface of PEO-Based SPEs with Borate Salts, Using in Situ Li Deposition PES Measurements Aided by AIMD Simulations

Polycation ionic liquid tailored PEO-based solid polymer electrolytes for high temperature lithium metal batteries

Tailored PEO/PEG-PPG Polymer Electrolyte for Solid-State Lithium-Ion Battery

Investigation on the mechanical integrity of PEO-based polymer electrolyte in all-solid-state lithium batteries

Stable Seamless Interfaces and Rapid Ionic Conductivity of Ca–CeO2/LiTFSI/PEO Composite Electrolyte for High‐Rate and High‐Voltage All‐Solid‐State Battery

Electrospun Poly(ethylene Oxide) Nanofibrous Composites with Enhanced Ionic Conductivity As Flexible Solid Polymer Electrolytes

Construction of Stable Li2O‐Rich Solid Electrolyte Interphase for Practical PEO‐Based Li‐Metal Batteries

Nanoporous Adsorption Effect on Alteration of the Li + Diffusion Pathway by a Highly Ordered Porous Electrolyte Additive for High-Rate All-Solid-State Lithium Metal Batteries.