Abstract:Schematic diagram of the crosslinking network and thermal degradation mechanism of SR composites. The over‐loading of heat‐resistant fillers in silicone rubber creates a contradiction between heat resistance and mechanical properties, thus greatly limiting the durability of silicone rubber products in cutting‐edge applications and complex scenarios. To address this issue, silicone rubber was filled with octavinyl polyhedral oligomeric silsesquioxane (POSS) and carbon nanotubes (CNT) and crosslinked with 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane (DBPMH) in an attempt to obtain composites with excellent mechanical properties and great thermal stability. Optical microscopy and X‐ray diffraction analyses revealed the size of POSS crystals decreased and the characteristic peaks disappeared after the peroxide crosslinked the polymer at elevated temperature. Specifically, silicone rubber composite filled with 0.1 phr POSS and 1.0 phr CNT exhibited a tensile strength of 10.2 MPa and elongation at a break of 450%. Further, the strength and elongation could be kept after thermo‐oxidative aging at 250°C for 32 h. Thermogravimetric analysis results demonstrate that the addition of POSS and CNT into silicone rubber exhibits a synergistic effect, markedly improving the thermal stability of the material. This method provides a valuable reference for manufacturing silicone rubber products that possess both excellent mechanical properties and high thermal stability under extreme working conditions. Highlights A novel silicone rubber composite with excellent mechanical properties and thermal stability was prepared. A small amount of octavinyl polyhedral oligomeric silsesquioxane (POSS) and carbon nanotubes exhibited a synergistic effect to improve thermal stability. The dependence of the morphological evolution of POSS crystals in SR on the 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane and temperature was studied.

Boron particles acting as antioxidants for fluorosilicone rubber due to their radical scavenging activity

A small addition of reduced graphene oxide to protect fluorosilicone rubber from thermal oxidative degradation

Enhancing mechanical property, thermal conductivity, and radiation stability of fluorine rubber through incorporation of hexagonal boron nitride nanosheets

Vinyl‐functionalized polyborosiloxane for improving mechanical and flame‐retardancy performances of silicone rubber foam composites

The effect of modified carbon-doped boron nitride on the mechanical, thermal and γ-radiation stability of silicone rubber composites

Boron nitride silicone rubber composite foam with low dielectric and high thermal conductivity

Fluorinated boron nitride nanosheets for high thermal conductivity and low dielectric constant silicone rubber composites

Effect of hydroxylated boron nitride and boron nitride nanosheets on the properties of doped organosilicone rubber composites

Enhancement of tracking resistance of silicone rubber through charge dissipation and radical capture by fluorosilane-grafted iron oxide

Enhancing mechanical property and thermal conductivity of fluororubber by the synergistic effect of CNT and BN

Boron‐polymer composites engineered for compression molding, foaming, and additive manufacturing

Synergistic Enhancement on Ignition and Combustion Properties of Boron via Viton Core-Shell Coating

Graphene nanoplatelets/barium titanate hybrid nanoparticles via ball milling for enhanced dielectric and mechanical properties of fluorosilicone rubber composites

Effect of Fluorosilicone Rubber on Mechanical Properties, Dielectric Breakdown Strength and Hydrophobicity of Methyl Vinyl Silicone Rubber

Improving ablation resistant properties of epoxy-silicone rubber composites via boron catalyzed graphitization and ceramization

Synergistic effect of multifunctional POSS and carbon nanotubes on mechanical properties and thermal stability of silicone rubber composites

Improvement of fluorosilicone resin on the tracking resistance of addition-cure liquid silicone rubber

High-Temperature Resistant Polyborosilazanes with Tailored Structures

Insight into the Key Role of Oxygen Dopants over Ball-Milled Boron Nitride for Efficient Degradation of PFOS Alternative 6:2 Fluorotelomer Sulfonic Acid.

Preparation of boron-containg hybridized silicon rubber by in-situ polymerization of vinylphenyl-functionalized polyborosiloxane and liquid silicone rubber

Efficient fabrication of flame-retarding silicone rubber/hydroxylated boron nitride nanocomposites based on volumetric extensional rheology