Abstract:Two-dimensional hexagonal boron nitride (hBN) has attracted tremendous attention over the last few years, thanks to its stable structure and its outstanding properties, such as mechanical strength, thermal conductivity, electrical insulation, and lubricant behavior. This work demonstrates that hBN can also improve the rheological and mechanical properties of elastomer composites when used to partially replace silica. In this work, commercially available pristine hBN (hBN-p) was exfoliated and ball-mill treated in air for different durations (2.5, 5, and 10 h milling). Functionalization occurred with the -NH and -OH groups (hBN-OH). The functional groups were detected using Fourier-Transform Infrared pectroscopy (FT-IR) and were estimated to be up to about 7% through thermogravimetric analysis. The presence of an increased amount of oxygen in hBN-OH was confirmed using Scanning Electron Microscopy coupled with Energy-Dispersive X-ray Spectroscopy. (SEM-EDS). The number of stacked layers, estimated using WAXD analysis, decreased to 8-9 in hBN-OH (10 h milling) from about 130 in hBN-p. High-resolution transmission electron microscopy (HR-TEM) and SEM-EDS revealed the increase in disorder in hBN-OH. hBN-p and hBN-OH were used to partially replace silica by 15% and 30%, respectively, by volume, in elastomer composites based on poly(styrene-co-butadiene) from solution anionic polymerization (S-SBR) and poly(1,4-cis-isoprene) from Hevea Brasiliensis (natural rubber, NR) as the elastomers (volume (mm3) of composites released by the instrument). The use of both hBNs in substitution of 30% of silica led to a lower Payne effect, a higher dynamic rigidity, and an increase in E' of up to about 15% at 70 °C, with similar/lower hysteresis. Indeed, the composites with hBN-OH revealed a better balance of tan delta (higher at low temperatures and lower at high temperatures) and better ultimate properties. The functional groups reasonably promote the interaction of hBN with silica and with the silica's coupling agent, sulfur-based silane, and thus promoted the interaction with the elastomer chains. The volume of the composite, measured using a high-pressure capillary viscometer, increased by about 500% and 400% after one week of storage in the presence of hBN-p and hBN-OH. Hence, both hBNs improved the processability and the shelf life of the composites. Composites obtained using hBN-OH had even filler dispersion without the detachments of the filler from the elastomer matrix, as shown through TEM micrographs. These results pave the way for substantial improvements in the important properties of silica-based composites for tire compounds, used to reduce rolling resistance and thus the improve environmental impacts.

Enhancing mechanical property, thermal conductivity, and radiation stability of fluorine rubber through incorporation of hexagonal boron nitride nanosheets

Enhancing mechanical property and thermal conductivity of fluororubber by the synergistic effect of CNT and BN

Hexagonal boron nitride/acrylic rubber composites:preparation, thermal and mechanical properties, and effect of γ-radiation

Synthesizing Ternary Filler of Multi-Walled Carbon Nanotubes/silica/carbon for Heightening Fluororubber's ' S Mechanical Performance

High loading boron nitride chemically bonded with silicone rubber to enhance thermal neutron shielding and flexibility of polymer nanocomposites

Fluorinated boron nitride nanosheets for high thermal conductivity and low dielectric constant silicone rubber composites

Highly Ductile UV-shielding Polymer Composites with Boron Nitride Nanospheres As Fillers

High performance fluoroelastomer composites filled with graphite and/or bismuth oxide for applications in gamma‐ray shielding

A Facile Strategy to Simultaneously Exfoliate and Functionalize Boron Nitride Nanosheets Via Lewis Acid-Base Interaction

Modified boron nitride reinforced natural rubber composites and molecular dynamics simulation

The effect of modified carbon-doped boron nitride on the mechanical, thermal and γ-radiation stability of silicone rubber composites

Enhanced mechanical and tribological properties of polymer nanocomposites by improving interfacial properties by hexagonal boron nitride nanosheets: Molecular dynamics simulations

Enhancement mechanism exploration of hexagonal boron nitride on the mechanical and tribological properties of polytetrafluoroethylene composites by experiments and molecular dynamics simulation

Superior Wear Resistance of Boron Phenolic Resin-Based Composites Using Fluorine Rubber Micro Powder As High-Performance Additive

Effect of gamma and neutron irradiation on properties of boron nitride/epoxy resin composites

Facile Fabrication of Organically Modified Boron Nitride Nanosheets and Its Effect on the Thermal Stability, Flame Retardant, and Mechanical Properties of Thermoplastic Polyurethane

Enhanced Thermal Conductivity and Mechanical Properties of Polymeric Composites Through Formation of Covalent Bonds Between Boron Nitride and Rubber Chains

Enhanced thermal conductivity and stability of boron nitride/phenyl silicone rubber composites via surface modification and grain alignment

Simultaneous improvements in the flame retardancy and neutron shielding properties of silicone rubber through gadolinium phenylphosphonate–boron nitride heterostructures

Effects of 2D Boron Nitride (BN) Nanoplates Filler on the Thermal, Electrical, Mechanical and Dielectric Properties of High Temperature Vulcanized Silicone Rubber for Composite Insulators

Hexagonal Boron Nitride as Filler for Silica-Based Elastomer Nanocomposites