Direct Laser-Patterned Ultra-Wideband Antennae with Carbon Nanotubes

Haochuan Qiu,Houfang Liu,Xiufeng Jia,Xiao Liu,Yuxing Li,Jiafeng Feng,Hongxiang Wei,Yi Yang,Tian-ling Ren

DOI: https://doi.org/10.1039/c8ra07173j

IF: 4.036

2018-01-01

RSC Advances

Abstract:We report a novel one-step laser-patterning technology for CNT ultra-wideband antennas.

What problem does this paper attempt to address?

Carbon Nanotubes/nanofibers for Microwave Amplifiers and Parallel E-Beam Lithography

P Vincent,L Gangloff,E Minoux,G Pirio,JP Schnell,D Pribat,P Legagneux,KBK Teo,R Lacerda,M Chhowalla,DG Hasko,H Ahmen,GAJ Amaratunga,V Semet,VT Binh,WH Bruenger,J Eichholz,H Hanssen,D Friedrich,M Castignolles,A Loiseau

DOI: https://doi.org/10.1109/ivmc.2003.1222989

2003-01-01

Abstract:In this paper, carbon nanotubes/nanofibers for microwave amplifiers and parallel e-beam lithography have been discussed. Field emission properties of CN arrays will be presented.
Optical waveguides and switches based on periodic arrays of carbon nanotubes

Butt, Haider,Dai, Qing,Wilkinson, T.D.,Amaratunga, G.

DOI: https://doi.org/10.1109/SIECPC.2011.5876983

2011-01-01

Abstract:This document presents the modeling and characterization of novel optical devices based on periodic arrays of multiwalled carbon nanotubes. Vertically aligned carbon nanotubes can be grown in the arrangement of two-dimensional arrays of precisely determined dimensions. Having their dimensions comparable to the wavelength of light makes carbon nanotubes good candidates for utilization in nano-scale optical devices. We report that highly dense periodic arrays of multiwalled carbon nanotubes can be utilized as sub-wavelength structures for establishing advanced optical materials, such as metamaterials and photonic crystals. We demonstrate that when carbon nanotubes are grown close together at spacing of the order of few hundred nanometers, they display artificial optical properties towards the incident light, acting as metamaterials. By utilizing these properties we have established micro-scaled plasmonic high pass filter which operates in the optical domain. Highly dense arrays of multiwalled also offer a periodic dielectric constant to the incident light and display interesting photonic band gaps, which are frequency domains within which on wave propagation can take place. We have utilized these band gaps displayed by a periodic nanotube array, having 400 nm spacing, to construct photonic crystals based optical waveguides and switches.
Aligned Carbon Nanotubes/Fibers for Applications in Vacuum Microwave Amplifiers

WI Milne,KBK Teo,E Minoux,O Groening,L Gangloff,L Hudanski,JP Schnell,D Dieumegard,F Peauger,IYY Bu,MS Bell,P Legagneux,G Hasko,GAJ Amaratunga

DOI: https://doi.org/10.1116/1.2161223

2006-01-01

Abstract:Most long-range telecommunication systems are based upon microwave links. The transmitters use microwave amplifiers which in the very near future will be required to work at up to 30–100GHz with output power in the region of a few tens of watts. Carbon nanotubes (CNTs), which exhibit extraordinary field emission properties because of their high electrical conductivity, ideal high aspect ratio whisker-like shape for geometrical field enhancement, and remarkable thermal stability, can be used as the emitter in such applications. This article will describe the plasma enhanced chemical vapor deposition growth of vertically aligned carbon nanotubes, and how well controlled arrays of such structures can be grown. We will also describe how high current densities of ∼1A∕cm2, under direct current and 1.5GHz direct modulation, can be obtained from CNT cathodes. These CNT cold cathodes offer considerable weight and size savings over conventional hot cathodes used in microwave applications (e.g., SATCOM, radar).
Ablation and Patterning of Carbon Nanotube Film by Femtosecond Laser Irradiation

Xuefeng Wu,Hailiang Yin,Qiang Li

DOI: https://doi.org/10.3390/app9153045

2019-01-01

Applied Sciences

Abstract:Carbon nanotube (CNT) film can be used as thin film electrodes and wearable electronic devices due to their excellent mechanical and electrical properties. The femtosecond laser has the characteristics of an ultra-short pulse duration and an ultra-high peak power, and it is one of the most suitable methods for film material processing. The ablation and patterning of CNT film are performed by a femtosecond laser with different parameters. An ablation threshold of 25 mJ/cm2 was obtained by investigating the effects of laser pulse energy and pulse number on ablation holes. Raman spectroscopy and scanning electron microscope (SEM) were used to characterize the performance of the pattern groove. The results show that the oligomer in the CNT film was removed by the laser ablation, resulting in an increase in Raman G band intensity. As the laser increased, the ablation of the CNTs was caused by the energy of photons interacting with laser-induced thermal elasticity when the pulse energy was increased enough to destroy the carbon–carbon bonds between different carbon atoms. Impurities and amorphous carbon were found at and near the cut edge while laser cutting at high energy, and considerable distortion and tensile was produced on the edge of the CNTs’ groove. Furthermore, appropriate cutting parameters were obtained without introducing defects and damage to the substrate, which provides a practical method applied to large-area patterning machining of CNT film.
Plasmonic band gaps and waveguide effects in carbon nanotube arrays based metamaterials.

Haider Butt,Qing Dai,Ranjith Rajesekharan,Timothy D Wilkinson,Gehan A J Amaratunga

DOI: https://doi.org/10.1021/nn203363x

IF: 17.1

2011-01-01

ACS Nano

Abstract:Highly dense periodic arrays of multiwalled carbon nanotubes behave like low-density plasma of very heavy charged particles, acting as metamaterials. These arrays with nanoscale lattice constants can be designed to display extended plasmonic band gaps within the optical regime, encompassing the crucial optical windows (850 and 1550 nm) simultaneously. We demonstrate an interesting metamaterial waveguide effect displayed by these nanotube arrays containing line defects. The nanotube arrays with lattice constants of 400 nm and radius of 50 nm were studied. Reflection experiments conducted on the nanoscale structures were in agreement with numerical calculations.
Broadband Nanophotonic Wireless Links and Networks Using On-Chip Integrated Plasmonic Antennas.

Yuanqing Yang,Qiang Li,Min Qiu

DOI: https://doi.org/10.1038/srep19490

IF: 4.6

2016-01-01

Scientific Reports

Abstract:Owing to their high capacity and flexibility, broadband wireless communications have been widely employed in radio and microwave regimes, playing indispensable roles in our daily life. Their optical analogs, however, have not been demonstrated at the nanoscale. In this paper, by exploiting plasmonic nanoantennas, we demonstrate the complete design of broadband wireless links and networks in the realm of nanophotonics. With a 100-fold enhancement in power transfer superior to previous designs as well as an ultrawide bandwidth that covers the entire telecommunication wavelength range, such broadband nanolinks and networks are expected to pave the way for future optical integrated nanocircuits.
Nanocone-Shaped Carbon Nanotubes Field-Emitter Array Fabricated by Laser Ablation

Jiuzhou Zhao,Zhenjun Li,Matthew Thomas Cole,Aiwei Wang,Xiangdong Guo,Xinchuan Liu,Wei Lyu,Hanchao Teng,Yunpeng Qv,Guanjiang Liu,Ke Chen,Shenghan Zhou,Jianfeng Xiao,Yi Li,Chi Li,Qing Dai

DOI: https://doi.org/10.3390/nano11123244

IF: 5.3

2021-11-29

Nanomaterials

Abstract:The nanocone-shaped carbon nanotubes field-emitter array (NCNA) is a near-ideal field-emitter array that combines the advantages of geometry and material. In contrast to previous methods of field-emitter array, laser ablation is a low-cost and clean method that does not require any photolithography or wet chemistry. However, nanocone shapes are hard to achieve through laser ablation due to the micrometer-scale focusing spot. Here, we develop an ultraviolet (UV) laser beam patterning technique that is capable of reliably realizing NCNA with a cone-tip radius of ≈300 nm, utilizing optimized beam focusing and unique carbon nanotube–light interaction properties. The patterned array provided smaller turn-on fields (reduced from 2.6 to 1.6 V/μm) in emitters and supported a higher (increased from 10 to 140 mA/cm2) and more stable emission than their unpatterned counterparts. The present technique may be widely applied in the fabrication of high-performance CNTs field-emitter arrays.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
High-Speed Carbon Nanotube Photodetectors for 2 μm Communications

Wu Weifeng,Ma Hui,Cai Xiang,Han Bing,Li Yan,Xu Ke,Lin Hongtao,Zhang Fan,Chen Zhangyuan,Zhang Zhiyong,Peng Lian-Mao,Wang Sheng

DOI: https://doi.org/10.1021/acsnano.3c04619

IF: 17.1

2023-01-01

ACS Nano

Abstract:In the era of big data, the growing demand for data transmission capacity requires the communication band to expand from the traditional optical communication windows (similar to 1.3-1.6 mu m) to the 2 mu m band (1.8-2.1 mu m). However, the largest bandwidth (similar to 30 GHz) of the current high-speed photodetectors for the 2 mu m window is considerably less than the developed 1.55 mu m band photodetectors based on III-V materials or germanium (>100 GHz). Here, we demonstrate a high-performance carbon nanotube (CNT) photodetector that can operate in both the 2 and 1.55 mu m wavelength bands based on high-density CNT arrays on a quartz substrate. The CNT photodetector exhibits a high responsivity of 0.62 A/W and a large 3 dB bandwidth of 40 GHz (setup-limited) at 2 mu m. The bandwidth is larger than that of existing photodetectors working in this wavelength range. Moreover, the CNT photodetector operating at 1.55 mu m exhibits a setup-limited 3 dB bandwidth over 67 GHz at zero bias. Our work indicates that CNT photodetectors with high performance and low cost have great potential for future highspeed optical communication at both the 2 and 1.55 mu m bands.
Metamaterial High Pass Filter Based on Periodic Wire Arrays of Multiwalled Carbon Nanotubes

Haider Butt,Qing Dai,Petros Farah,Tim Butler,Timothy D. Wilkinson,Jeremy J. Baumberg,Gehan A. J. Amaratunga

DOI: https://doi.org/10.1063/1.3491840

IF: 4

2010-01-01

Applied Physics Letters

Abstract:In this manuscript, we demonstrate metamaterials based on two-dimensional high density arrays of metallic multiwalled carbon nanotubes. They demonstrate a cutoff response toward electromagnetic waves and can be utilized for filtering applications. The plasma frequency, where the metamaterial displayed a sharp change in the reflection and transmission, depends on the geometry of their two-dimensional cubic lattice. A plasma frequency in the near infrared region of 1.5 μm was calculated numerically, for an array consisting of multiwalled nanotubes, having radius of 50 nm and lattice constant of 400 nm. Reflection experiments conducted on the nanoscale structures were in excellent agreement with numerical calculations.
Efficient Fabrication of Carbon Nanotube Micro Tip Arrays by Tailoring Cross-Stacked Carbon Nanotube Sheets.

Yang Wei,Peng Liu,Feng Zhu,Kaili Jiang,Qunqing Li,Shoushan Fan

DOI: https://doi.org/10.1021/nl300271p

IF: 10.8

2012-01-01

Nano Letters

Abstract:Carbon nanotube (CNT) micro tip arrays with hairpin structures on patterned silicon wafers were efficiently fabricated by tailoring the cross-stacked CNT sheet with laser. A blade-like structure was formed at the laser-cut edges of the CNT sheet. CNT field emitters, pulled out from the end of the hairpin by an adhesive tape, can provide 150 μA intrinsic emission currents with low beam noise. The nice field emission is ascribed to the Joule-heating-induced desorption of the emitter surface by the hairpin structure, the high temperature annealing effect, and the surface morphology. The CNT emitters with hairpin structures will greatly promote the applications of CNTs in vacuum electronic devices and hold the promises to be used as the hot tips for thermochemical nanolithography. More CNT-based structures and devices can be fabricated on a large scale by this versatile method.
Numerical investigations of a multi-walled carbon nanotube-based multi-segmented optical antenna

X. Cui,L. Dong,W. Zhang,W. Wu,Y. Tang,D. Erni

DOI: https://doi.org/10.1007/s00340-010-4220-6

2010-01-01

Applied Physics B

Abstract:Motivated by the fabrication potential of multi-walled carbon nanotube structures, we numerically investigated a paired structure consisting of two metallic spheres each grown on one end of a multi-walled nanotube. The paired two-segmented structure is capable to convert free-space radiation into an intense near-field, and, hence, acting as an optical antenna. Vice versa the presence of the two nanotubes enable a current source at the antenna feed to more efficiently energy into the radiation modes, resulting e.g. in correspondingly altered luminescence lifetimes when an excited single molecule is placed in the feed point. Furthermore, the structure represents a mean to localize light on a sub-wavelength scale within different materials, which is interesting in the context of a fabrication technology for integrated nanophotonic components with different material combinations. The optical properties of the nano-antenna are analyzed by means of numerical simulations using the finite element method. Our investigations have revealed that the field enhancement, the resonances, and the radiation patterns can be easily tuned since all these quantities strongly depend on the size of the nanotubes and the metallic spheres, as well as on their material properties The structure we propose here carries a great potential for bio-sensing, for tip-enhanced spectroscopy applications, and for interfacing integrated photonic nano circuits.
Multilevel, Multicomponent Microarchitectures of Vertically-Aligned Carbon Nanotubes for Diverse Applications

Liangti Qu,Rich A. Vaia,Liming Dai

DOI: https://doi.org/10.1021/nn102411s

IF: 17.1

2011-01-01

ACS Nano

Abstract:A simple multiple contact transfer technique has been developed for controllable fabrication of multilevel, multicomponent microarchitectures of vertically aligned carbon nanotubes (VA-CNTs). Three dimensional (3-D) multicomponent micropatterns of aligned single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs) have been fabricated, which can be used to develop a newly designed touch sensor with reversible electrical responses for potential applications in electronic devices, as demonstrated in this study. The demonstrated dependence of light diffraction on structural transfiguration of the resultant CNT micropattern also indicates their potential for optical devices. Further introduction of various components with specific properties (e.g., ZnO nanorods) into the CNT micropatterns enabled us to tailor such surface characteristics as wettability and light response. Owing to the highly generic nature of the multiple contact transfer strategy, the methodology developed here could provide a general approach for interposing a large variety of multicomponent elements (e.g., nanotubes, nanorods/wires, photonic crystals, etc.) onto a single chip for multifunctional device applications.
Multi-walled carbon nanotube-based RF antennas

Taha A Elwi,Hussain M Al-Rizzo,Daniel G Rucker,Enkeleda Dervishi,Zhongrui Li,Alexandru S Biris

DOI: https://doi.org/10.1088/0957-4484/21/4/045301

IF: 3.5

2010-01-29

Nanotechnology

Abstract:A novel application that utilizes conductive patches composed of purified multi-walled carbon nanotubes (MWCNTs) embedded in a sodium cholate composite thin film to create microstrip antennas operating in the microwave frequency regime is proposed. The MWCNTs are suspended in an adhesive solvent to form a conductive ink that is printed on flexible polymer substrates. The DC conductivity of the printed patches was measured by the four probe technique and the complex relative permittivity was measured by an Agilent E5071B probe. The commercial software package, CST Microwave Studio (MWS), was used to simulate the proposed antennas based on the measured constitutive parameters. An excellent agreement of less than 0.2% difference in resonant frequency is shown. Simulated and measured results were also compared against identical microstrip antennas that utilize copper conducting patches. The proposed MWCNT-based antennas demonstrate a 5.6% to 2.2% increase in bandwidth, with respect to their corresponding copper-based prototypes, without significant degradation in gain and/or far-field radiation patterns.
Optical Fibers Embedded with As-Grown Carbon Nanotubes for Ultrahigh Nonlinear Optical Responses

Qi Xiao,Jin Xie,Guangjie Yao,Kaifeng Lin,Hao-Li Zhang,Liu Qian,Kaihui Liu,Jin Zhang

DOI: https://doi.org/10.1002/adma.202303046

2023-01-01

Abstract:Photonic crystal fiber (PCF) embedded with functional materials has demonstrated diverse applications ranging from ultrafast lasers, optical communication to chemical sensors. Many efforts have been made to fabricating carbon nanotube (CNT) based optical fibers by ex situ transfer method; however, often suffer poor uniformity and coverage. Here, the direct growth of CNTs on the inner walls of PCFs by the chemical vapor deposition (CVD) method is reported. A two-step growth method is developed to control the narrow diameter distribution of CNTs to ensure desirable nanotube optical transitions. In the as-fabricated CNT- embedded fiber, third-harmonic generation (THG) has been enhanced by & AP;15 times compared with flat CNT film on fused silica. A dual-wavelength all-fiber mode-locked ultrafast laser (& AP;1561 and & AP;1064 nm) is further demonstrated by integrating the 1.36 & PLUSMN;0.15 nm-diameter CNTs into two kinds of photonic bandgap hollow core PCF (named HC-1550 and HC-1060) as saturable absorbers, using their S-11 (& AP;0.7 eV) and S-22 (& AP;1.2 eV) interband transition respectively. The fiber laser shows stable output of & AP;10 mW, & AP;800 fs pulse width, and & AP;71 MHz repetition rate at 1561 nm wavelength. These results can enable the large-scale applications of CNTs in PCF-based optical devices.
Quiver-Quenched Optical-Field-Emission from Carbon Nanotubes

Chi Li,Xu Zhou,Feng Zhai,Zhenjun Li,Fengrui Yao,Ruixi Qiao,Ke Chen,Dapeng Yu,Zhipei Sun,Kaihui Liu,Qing Dai

DOI: https://doi.org/10.1063/1.5003004

IF: 4

2017-01-01

Applied Physics Letters

Abstract:Carbon nanotubes (CNTs) enable large electric field enhancement for an extremely broad bandwidth spanning from the optical domain down to static fields. This is due to their high aspect ratio, small tip radius, and high structural stability. CNTs therefore represent an ideal model-system for the investigation of nonlinear and strong-field phenomena. In this paper, we extend the range of optical-field-emission materials from metal nanostructures to CNTs. Quiver-quenched optical-field-emission (i.e., the transition to a sub-cycle regime) is observed for CNTs tips in a short-wavelength laser field of 820 nm that requires a mid-infrared excitation field of conventional metal tips emitters. This special property relies on the ultrasmall tips radius (∼1 nm) and the high optical-field enhancement (∼21.6) properties of CNTs. This study suggests that CNTs are excellent candidates for optically driven ultrafast electron sources with both high spatial and high temporal coherence. They also provide more freedom for the manipulation and control of electron dynamics at the attosecond timescale, which extends the bandwidth of light-wave electronic devices.
An Etching-Free Method for Patterning Carbon Nanotube Films Enabled by Universal Wettability Modulation

Rui Qiu,Qinqi Ren,Qi Liu,Lei Lu,Min Zhang

DOI: https://doi.org/10.1109/nmdc46933.2022.10052161

2022-01-01

Abstract:Non-destructive patterning of low-dimensional materials has always been a challenge. An etching-free patterning method for high-density carbon nanotube (CNT) network has been proposed based on a wettability modulation method. By adopting this method, we have realized high-resolution patterns of CNT films, which have been uniformly formed on the wetting regions with precise boundaries. A flexible thin-film transistor array has been further realized, which shows excellent electrical performance with on/off current ratio of 104 as well as subthreshold swing of 280 mV/dec. This high-efficiency, high-resolution, and etching-free patterning approach of CNTs holds great promise for numerous potential applications in flexible and stretchable electronics and provides general solution for the low-temperature low-dimension material fabrications of advanced electronics.
Large area patterned arrays of aligned carbon nanotubes via laser trimming

Fook Chiong Cheong,Kim Yong Lim,Chorng Haur Sow,Jianyi Lin,Chong Kim Ong

DOI: https://doi.org/10.1088/0957-4484/14/4/305

IF: 3.5

2003-01-01

Nanotechnology

Abstract:We develop a simple to implement, inherently parallel and high throughput technique for the fabrication of large areas of patterned aligned multi-wall carbon nanotube (CNT) arrays deposited on silicon or quartz substrate. This technique makes use of a parallel or converging laser beam from a high power pulsed laser for the destruction of aligned CNTs with a copper grid as lithography mask to define patterned aligned CNT arrays. The wavelength of the laser beam used is 248 nm and the average energy per pulse is 500 mJ. Using this technique, an extensive area of patterned CNT arrays as large as 3 x 5 mm(2) can be fabricated without the use of any pre-patterned substrate. In addition, we were able to control the size of the features created by (1) using different copper grids and (2) using a converging beam. Exposing the sample to different numbers of laser pulses allows us to generate families of CNTs with different uniform lengths. Furthermore, using two overlapping grids as a lithography mask, we managed to create a regular array of features with sizes as small as 2.5 mum.
Laser Direct Writing Carbon Nanotube Arrays on Transparent Substrates

Zhuo Chen,Yang Wei,Chunxiang Luo,Kaili Jiang,Lina Zhang,Qunqing Li,Shoushan Fan,Jiancun Gao

DOI: https://doi.org/10.1063/1.2717530

IF: 4

2007-01-01

Applied Physics Letters

Abstract:The authors report the synthesis of multiwalled carbon nanotubes on transparent substrates by utilizing a diode laser to locally heat the catalysts to high temperature. Well-aligned bamboo-shaped multiwalled carbon nanotubes can be synthesized on glass substrate covered with a carbon black layer. If the carbon black was substituted by the commercial graphite inner coating, randomly oriented but high quality multiwalled carbon nanotubes were obtained with excellent field emission performance. This approach facilitates the fabrication of multiwalled carbon nanotube field emitters for field emission flat panel displays without limitations on the geometry size and temperature requirement of the substrate.
Mask-Free Patterning of High-Conductivity Metal Nanowires in Open Air by Spatially Modulated Femtosecond Laser Pulses

Andong Wang,Lan Jiang,Xiaowei Li,Yang Liu,Xianzi Dong,Liangti Qu,Xuanming Duan,Yongfeng Lu

DOI: https://doi.org/10.1002/adma.201503289

IF: 29.4

2015-01-01

Advanced Materials

Abstract:A novel high-resolution nanowire fabrication method is developed by thin-film patterning using a spatially modulated femtosecond laser pulse. Deep subwavelength (≈1/13 of the laser wavelength) and high conductivity (≈1/4 of the bulk gold) nanowires are fabricated in the open air without using masks, which offers a single-step arbitrary direct patterning approach for electronics, plasmonics, and optoelectronics nanodevices.
Ultrafast Carbon Nanotube Photodetectors with Bandwidth over 60 GHz

Weifeng Wu,Fan Yang,Xiansong Fang,Xiang Cai,Xiaohui Liu,Fan Zhang,Sheng Wang

DOI: https://doi.org/10.1021/acsphotonics.2c01626

IF: 7

2023-03-14

ACS Photonics

Abstract:The future interconnect links in intra- and interchip require a photodetector with high bandwidth, ultrawide waveband, compact footprint, low cost, and compatible integration process with silicon complementary metal–oxide–semiconductor (CMOS) technology. Here, we demonstrate a CMOS-compatible carbon nanotube (CNT) photodetector that exhibits high responsivity, high bandwidth, and broad spectral operation over all optical telecommunication bands based on high-purity CNT arrays asymmetrically contacted by palladium and hafnium electrodes. The ultrafast CNT photodetector demonstrates the 100 Gbit/s Nyquist-shaped on–off keying (OOK) signal transmission, which can address the demand for high-speed optical interconnects in and between data centers. Furthermore, the photodetector exhibits a bandwidth over 60 GHz by scaling down the active area to 20 μm2. As the CNT photodetectors are fabricated by a doping-free process, it also provides a cost-effective solution to integrate CNT photonic devices with CNT-based CMOS-integrated circuits. Our work paves a way for future CNT-based high-speed optical interconnects and optoelectronic-integrated circuits (OEICs).

physics, condensed matter,optics, applied,materials science, multidisciplinary,nanoscience & nanotechnology

Direct Laser-Patterned Ultra-Wideband Antennae with Carbon Nanotubes

Carbon Nanotubes/nanofibers for Microwave Amplifiers and Parallel E-Beam Lithography

Optical waveguides and switches based on periodic arrays of carbon nanotubes

Aligned Carbon Nanotubes/Fibers for Applications in Vacuum Microwave Amplifiers

Ablation and Patterning of Carbon Nanotube Film by Femtosecond Laser Irradiation

Plasmonic band gaps and waveguide effects in carbon nanotube arrays based metamaterials.

Broadband Nanophotonic Wireless Links and Networks Using On-Chip Integrated Plasmonic Antennas.

Nanocone-Shaped Carbon Nanotubes Field-Emitter Array Fabricated by Laser Ablation

High-Speed Carbon Nanotube Photodetectors for 2 μm Communications

Metamaterial High Pass Filter Based on Periodic Wire Arrays of Multiwalled Carbon Nanotubes

Efficient Fabrication of Carbon Nanotube Micro Tip Arrays by Tailoring Cross-Stacked Carbon Nanotube Sheets.

Numerical investigations of a multi-walled carbon nanotube-based multi-segmented optical antenna

Multilevel, Multicomponent Microarchitectures of Vertically-Aligned Carbon Nanotubes for Diverse Applications

Multi-walled carbon nanotube-based RF antennas

Optical Fibers Embedded with As-Grown Carbon Nanotubes for Ultrahigh Nonlinear Optical Responses

Quiver-Quenched Optical-Field-Emission from Carbon Nanotubes

An Etching-Free Method for Patterning Carbon Nanotube Films Enabled by Universal Wettability Modulation

Large area patterned arrays of aligned carbon nanotubes via laser trimming

Laser Direct Writing Carbon Nanotube Arrays on Transparent Substrates

Mask-Free Patterning of High-Conductivity Metal Nanowires in Open Air by Spatially Modulated Femtosecond Laser Pulses

Ultrafast Carbon Nanotube Photodetectors with Bandwidth over 60 GHz