Abstract:Adjustable ring-mode laser welding (ARM) provides a new solution for the pore defects of aluminum alloy joints. However, the inhibition mechanism of ARM for porosity defects in the aluminum alloy welds with medium-thickness is still lacking. In this work, the dynamic behavior of the keyhole/molten pool and the formation/transport process of bubbles during adjustable ring-mode laser welding of medium-thick aluminum alloy are investigated by experiments and simulations. The results display that the laser power ratio of central-ring beam of 6:4, the porosity is 4.19 ± 2.32 %, which is reduced by 52.2 % compared with the weld by single laser welding (SLW) of the same penetration depth. The addition of ring beam helps to enlarge the tilt angle of the keyhole rear wall, which increases the ability of the keyhole wall to resist the impact of the molten pool. Besides, it also lowers the radial pressure gradient and the local variation of the keyhole wall. These reasons reduce the formation of pores. Furthermore, the main eddy current direction of the molten pool changes less frequently, and the melt flow velocity impacting the keyhole wall only changes in the range of 0–0.5 m/s (SLW: 0.25–0.75 m/s). This diminishes the fluid dynamic pressure which is the primary driving force of the bubbles. The velocity of the bubble moving away from the bottom of the keyhole is decreased and it is more likely to remelt the keyhole and escape under the action of the laser beam at the next moment. This work provides engineering application and theoretical reference value for the suppression of pore defects in laser welding of aluminum alloy in medium-thick plates.

Effect of keyhole mode on weld shape and mechanical properties of thin sheets of Al-Si coated 22MnB5 steel

Influence mechanism of the keyhole behavior on penetration depth by in-situ monitoring in pulsed laser welding of aluminum alloy

Effects of Keyhole Status on Melt Flow and Flow-Induced Porosity Formation During Double-Sided Laser Welding of AA6056/AA6156 Aluminium Alloy T-joint

Effect of Magnesium Content on Keyhole-Induced Porosity Formation and Distribution in Aluminum Alloys Laser Welding

Effects of Mg content on keyhole behaviour during deep penetration laser welding of Al-Mg alloys

Effect of plate thickness on weld pool dynamics and keyhole-induced porosity formation in laser welding of Al alloy

Role of Welding Speed on Keyhole-Induced Porosity Formation Based on Experimental and Numerical Study in Fiber Laser Welding of Al Alloy

Study on keyhole characteristics and weld pool dynamics of Ti6Al4V alloy fabricated by continuous wave laser beam welding

Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Numerical Simulation of Keyhole Morphology and Molten Pool Flow Behavior in Aluminum Alloy Electron-Beam Welding

Research on keyhole-induced porosity and melt flow kinetic behavior of 2219 alloy T-joint manufactured by dual laser-beam bilateral synchronous welding

Enhanced Penetration Depth during Reduced Pressure Keyhole-Mode Laser Welding

Study of Keyhole Closure and Analysis of Microstructure and Mechanical Performance of Weld Joints for Variable Polarity Vertical Up Plasma Arc Welding Process

Investigation on the keyhole/molten pool dynamic behavior during adjustable ring-mode laser welding of medium-thick aluminum alloy

Arc and keyhole behavior in narrow-gap oscillating laser-MIG hybrid welding of thick aluminum alloys

Modeling of Keyhole-Induced Pore Formation in Laser-Arc Hybrid Welding of Aluminum Alloy with a Horizontal Fillet Joint

Study on the influence of Al-Si welding wire on porosity sensitivity in laser welding and process optimization

Effect of droplet transition on the dynamic behavior of the keyhole during 6061 aluminum alloy laser-MIG hybrid welding

Investigation on keyhole stability and surface quality in laser welding of TC4 titanium alloy with adjustable ring-mode (ARM) laser

Dissimilar Laser Spot Welding of Aluminum Alloy to Steel in Keyhole Mode