Preparation of Binderless Nanopore-Isotropic Graphite for Inhibiting the Liquid Fluoride Salt and Xe135 Penetration for Molten Salt Nuclear Reactor
Jinliang Song,Yanling Zhao,Junpeng Zhang,Xiujie He,Baoliang Zhang,Pengfei Lian,Zhanjun Liu,Dongsheng Zhang,Zhoutong He,Lina Gao,Huihao Xia,Xingtai Zhou,Ping Huai,Quangui Guo,Lang Liu
DOI: https://doi.org/10.1016/j.carbon.2014.07.022
IF: 10.9
2014-01-01
Carbon
Abstract:Mesocarbon microbeads and the isostatic pressing method were used to prepare binderless nanopore-isotropic graphite (NPIG) as a neutron moderator and reflector, to inhibit liquid fluoride salt and Xe135 penetration during use in a molten salt nuclear reactor. The microstructure, thermophysical, and other properties of the NPIG were studied and compared with isostatic graphite (IG-110, TOYO TANSO CO., Ltd., Japan). A high-pressure reactor and a vacuum device were constructed to evaluate the molten salt and Xe135 penetration in the graphite, respectively. The results indicated that NPIG possessed a graphitization degree of 74% and excellent properties such as a high bending strength of 94.1 ± 2.5 MPa, a high compressive strength of 230 ± 3 MPa, a low porosity of 8.7%, and an average pore diameter of 69 nm. The fluoride salt occupation of IG-110 was 13.5 wt% under 1.5 atm, whereas the salt gain in NPIG remained steady even up to 10 atm with an increase of <0.06 wt%, demonstrating that the graphite could inhibit the liquid fluoride salt infiltration effectively. The helium diffusion coefficient for NPIG was 8.76 × 10−5 cm2/s, much less than 1.21 × 10−2 cm2/s for IG-110. The NPIG could effectively inhibit liquid fluoride salt and Xe135 penetration.