Abstract:To enhance the strength of traditional 5xxx series alloys, this work designed Al-Mg-Zn alloys with high Mg content and different Zn/Mg ratios (wt%, Zn/Mg ratio<1.0) drawing inspiration from aging precipitation strengthening of 2xxx or 7xxx series aluminum alloys and thermodynamic calculation. Measurement of density, microhardness and tensile property as well as electron backscatter diffraction (EBSD) and high-resolution transmission electron microscopy (HRTEM) were used to investigate the effects of four different Zn/Mg ratios on the aging precipitation behavior and mechanical property of the studied alloys. As Zn/Mg ratio increases, both N3 (Zn/Mg = 0.37) and N4 (Zn/Mg = 0.71) precipitate fine and dispersed distributed nano T-Mg-32(Al,Zn)(49) precipitates. After a two-step aging treatment process of 90 degree celsius/24 h + 140 degree celsius/8 h, N4 exhibits tensile strength of 595.5 MPa, yield strength of 484 MPa, and elongation of 10.2% in the peak state. N4 features higher specific strength and lower density compared to the popular 7075-T6. The TEM analysis reveals that the addition of trace Sc and Zr leads to the formation of Al-3(Sc,Zr) precipitates, which significantly refines grain size thus enhancing strength. The primary strengthening mechanisms of Al-Mg-Zn-Sc-Zr alloy include grain boundary strengthening, solid solution strengthening, and precipitation strengthening. A yield strength model considering multiple strengthening mechanisms and thermodynamic calculation has been adopted to achieve accurate yield strength predictions. This work provides reference for composition design, microstructure and property regulation of lightweight high-strength aluminum alloys.

Influence of Zn on the distribution and composition of heterogeneous solute-rich features in peak aged Al-Mg-Si-Cu alloys

Effect of Zn Concentration on the Microstructure and Mechanical Properties of Al-Mg-Si-Zn Alloys Processed by Gravity Die Casting

Solute Clustering in Al-Mg-Si-Cu-(Zn) Alloys During Aging

The Effect of Zn Content on the Age-Hardening Response and Precipitation Behavior for Al-8Si-0.6Mg-0.1Cu Alloys

Microstructural Characteristics and Aging Response of Zn-containing Al-Mg-Si-Cu Alloy

Aging Behavior and Precipitate Characterization of Zn-rich Al–Zn–Mg–Cu Alloys with Various Mg and Cu Contents

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys

Effect of Trace Zn on the Mechanical Properties and Corrosion Behavior of Al-Mg-Si Alloys with High Cu

Effects of Zn Addition on the Aging Behavior and Mechanical Properties of Mg-8Al-2Sn Wrought Alloy

Enhanced age-hardening by synergistic strengthening from Mg Si and Mg Zn precipitates in Al-Mg-Si alloy with Zn addition

Non-Isothermal Precipitation Behaviors of Al-Mg-Si-Cu Alloys with Different Zn Contents

Effect of Zn on Precipitation Evolution and Mechanical Properties of a High Strength Cast Al-Li-Cu Alloy

Influence of Aging Pathways on the Evolution of Heterogeneous Solute-Rich Features in Peak-Aged Al-Mg-Si-Cu Alloy with a High Mg/Si Ratio

Effect of Zn Addition on the Precipitation Behaviors of Al–Mg–Si–Cu Alloys for Automotive Applications

Effect of Cu Content and Zn/Mg Ratio on Microstructure and Mechanical Properties of Al–Zn–Mg–Cu Alloys

Effect of Zn or Zn + Cu Addition on the Precipitation in Al–Mg–Si Alloys: A Review

Microstructural Characteristics and Mechanical Properties of Extruded Al-4Cu-1Li-0.4Mg-0.1Zr-xZn Alloy

Influence of Zn Contents on Precipitation and Corrosion of Al-Mg-Si-Cu-Zn Alloys for Automotive Applications

Enhanced and Accelerated Age Hardening Response of Al-5.2Mg-0.45Cu (wt%) Alloy with Zn Addition

Microstructural Characteristics and Mechanical Properties of Cast Mg–3Nd–3Gd–xZn–0.5Zr Alloys

Effect of Zn/Mg Ratio on Aging Precipitates and Mechanical Property of High Mg Content Al-Mg-Zn Alloys with Sc and Zr Additions