Abstract:Tungsten oxide (WO3) is a strong candidate as the photoanode in photoelectrochemical (PEC) water splitting owing to its moderate band gap (2.6–3.2 eV) for wide light absorption and stable physicochemical properties. This work reports a morphology engineering strategy to fabricate voltage-induced terrace-like tungsten oxide (TW) film and its high-voltage performance as a photoanode for PEC water splitting. By controlling the anodization voltage, the morphology of the anodic WO3 film was altered, and their photoelectrochemical performances were compared. Anodization of the tungsten film in fluoride-containing H3PO4 leads to the growth of either irregular porous tungsten oxide layers or terrace-like tungsten oxide layers, depending on the anodic potentials. The possible growth mechanism of the porous oxide layer during anodization is proposed with a combination of the field-assisted dissolution model and the oxygen-bubble mold model. Under light irradiation, the photocurrent density was 3.0 mA cm–2 at 1.23 V vs RHE (VRHE) for annealed terrace-like WO3, which was almost 3 times larger than that of annealed porous WO3. As a photoanode, terrace-like WO3 films could generate hydrogen at 58 μmol cm–2 h–1 under simulated solar light, while porous WO3 films produced hydrogen with a slower rate of 28 μmol cm–2 h–1. The terrace-like WO3 films experience higher photoelectrochemical performance and incident photon-to-electron conversion efficiency (IPCE) than porous WO3 due to more regular nanostructure, smaller band gap, fast charge-transfer rate, and alleviated recombination rate. This study shows that morphology control can effectively enhance the photocurrent density and IPCE of photoanodes and suggests a practical direction for finding the optimal WO3 films for PEC water splitting.

Epitaxial growth of WO3 nanoneedles achieved using a facile flame surface treatment process engineering of hole transport and water oxidation reactivity

ALD-based hydrothermal facile synthesis of a dense WO<sub>3</sub>@TiO<sub>2</sub>-Fe<sub>2</sub>O<sub>3</sub> nanodendrite array with enhanced photoelectrochemical properties

Efficient and Controllable Flame Method to Generate Rich Oxygen Vacancies in WO3 Nanosheet Arrays to Enhance Solar Water Oxidation

Promoting Photogenerated Holes Utilization in Pore-Rich WO3 Ultrathin Nanosheets for Efficient Oxygen-Evolving Photoanode

Large-Scale Tunable 3D Self-Supporting WO3 Micro-Nano Architectures As Direct Photoanodes for Efficient Photoelectrochemical Water Splitting.

Synthesis of WO3@ZnWO4@ZnO-ZnO Hierarchical Nanocactus Arrays for Efficient Photoelectrochemical Water Splitting

Preparation of Well-Aligned WO3 Nanoflake Arrays Vertically Grown on Tungsten Substrate As Photoanode for Photoelectrochemical Water Splitting

Facile Synthesis of a Micro–Nano-Structured FeOOH/BiVO4/WO3 Photoanode with Enhanced Photoelectrochemical Performance

Rational and Scalable Fabrication of High-Quality Wo3/Cds Core/Shell Nanowire Arrays for Photoanodes Toward Enhanced Charge Separation and Transport under Visible Light

In Situ Growth of Fe2WO6 on WO3 Nanosheets to Fabricate Heterojunction Arrays for Boosting Solar Water Splitting.

Surface tuning for promoted charge transfer in hematite nanorod arrays as water-splitting photoanodes

Engineering Single-Atomic Ni-N4-O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

Preparation of Vertically Aligned WO3 Nanoplate Array Films Based on Peroxotungstate Reduction Reaction and Their Excellent Photoelectrocatalytic Performance

Preparation and characterization of a novel WO_3/W photoanode

Effective electron collection in highly (110)-oriented ZnO porous nanosheet framework photoanode.

Ultrathin and Conformal TiO X Overlayers on WO3 Photoelectrodes for Simultaneous Surface Trap Passivation and Heterojunction Formation

Oxygen vacancy-mediated WO3 phase junction to steering photogenerated charge separation for enhanced water splitting

High-Voltage Etching-Induced Terrace-like WO 3 Photoanode for Efficient Photoelectrochemical Water Splitting

Tuning the Carrier Transfer Behavior of Coaxial ZnO/ZnS/ZnIn2 S4 Nanorods with a Coherent Lattice Heterojunction Structure for Photoelectrochemical Water Oxidation

In situ integration of cocatalyst and heterojunction to WO3 photoanode with enhanced photoelectrochemical performance via phosphatization

Oxygen vacancy engineering with flame heating approach towards enhanced photoelectrochemical water oxidation on WO3 photoanode