Abstract:Fabrication and testing of magnetic polymer nanocomposites with synthesized MWCNT/Fe3O4 nanofillers. A comparative analysis was conducted among nanocomposites fabricated using pristine multi‐walled carbon nanotubes (MWCNTs), iron oxide nanoparticles (Fe3O4), MWCNT/Fe3O4 hybrid nanofillers, and a mixture of MWCNTs and Fe3O4 nanoparticles with varying nanofiller contents. MWCNT/Fe3O4 hybrid nanofillers with significant magnetic properties were synthesized using a chemical coating method to reinforce the epoxy polymer. Characterization techniques, including transmission electron microscopy, energy‐dispersive x‐ray spectroscopy, and Fourier transform infrared spectroscopy, confirmed the successful attachment of Fe3O4 nanoparticles onto MWCNTs. Various solvents and sonication parameters were employed to improve the dispersion quality of nanofillers within the epoxy matrix, and their collective impact on the thermomechanical properties of nanocomposites was investigated. The results showed that nanocomposites containing MWCNT/Fe3O4 hybrid nanofillers dispersed using chloroform and optimized sonication parameters exhibited 5%, 9%, 32%, and 46% improvements in tensile strength and 11%, 20%, 38%, and 50% improvements in elastic modulus compared to those fabricated with mixed nanofillers, pristine MWCNTs, Fe3O4 nanoparticles, and the neat epoxy, respectively. These nanocomposites also experienced considerable enhancements in thermal stability parameters. Field‐emission scanning electron microscopy was also used to evaluate the dispersion quality and failure mechanisms. The results of this study can be applied in industries that require controllable magnetic properties. Highlights Confirmed successful attachment of Fe3O4 nanoparticles onto MWCNTs. Sonication parameters considerably affected thermomechanical properties. Chloroform showed the highest improvement in thermomechanical properties. The improvements were due to the high dispersion quality assessed by FESEM. Hybrid nanofillers showed superior properties than single and mixed fillers.

Improving the Mechanical Properties of Fe3O4/carbon Nanotube Reinforced Nanocomposites by a Low-Magnetic-field Induced Alignment

Optimizing the Nano-structure of Magnetic Micro-wires for Multifunctional Macro-composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Optimizing Mechanical and Electrical Performance of SWCNTs/Fe3O4 Epoxy Nanocomposites: The Role of Filler Concentration and Alignment

Preparation of magnetic solvent-free carbon nanotube/Fe 3 O 4 nanofluid sizing agent to enhance thermal conductivity and interfacial properties of carbon fiber composites

Anisotropic Reinforcement in Polymer Nanocomposites Using Dielectric-Magnetic Difunctional Fibers

Significant Improvement of Mechanical Properties Observed in Highly Aligned Carbon-Nanotube-Reinforced Nanofibers

A comparative study on the thermomechanical properties of polymeric nanocomposites incorporating single, mixed, and hybrid nanofillers

Facile synthesis of magnetic nanoparticle-coated single-walled carbon nanotubes and its functional modification in epoxy resin

Facile attachment of magnetic nanoparticles to carbon nanotubes via robust linkages and its fabrication of magnetic nanocomposites

Enhanced thermally conductive and dielectrical properties of EP/Co@GNP composites: A strategy via constructing hybrid filler networks using magnetic field-aided orientation

Improved Mechanical and Electrical Properties in Electrospun Polyimide/multiwalled Carbon Nanotubes Nanofibrous Composites

Optimizing the High-Frequency Magnetic Properties of Soft Magnetic Composites Via Surface Nanoengineering

Developing multi-wall carbon nanotubes/Fusion-bonded epoxy powder nanocomposite coatings with superior anti-corrosion and mechanical properties

Investigation of Fiber Orientation of Fused Filament Fabricated CFRP Composites via an External Magnetic Field

An Easy Approach to Encapsulating Fe3O4 Nanoparticles in Multiwalled Carbon Nanotubes

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups

Alignment Of Multiwalled Carbon Nanotubes In Bulk Epoxy Composites Via Electric Field

Fabrication, mechanical, and electromagnetic studies of cobalt ferrite based‐epoxy nanocomposites

Effect of three-dimensional to one-dimensional orientation of cellulose nanofiber sizing agents on carbon fibers under magnetic and electric fields on composite material properties

Designing [100]-oriented Mn 0.988 Ni 0.012 CoSi/epoxy composites with large and reversible magnetic-field-induced strain by curing under a rotating magnetic field