Abstract:The quantitative role of aftertreatment technologies in particulate matter (PM)-induced toxicities remains unclear. This study reports the efficacy of aftertreatment technologies on PM-related toxicity as well as the chemical-specific contribution to PM-induced reactive oxygen species (ROS) generation. Polycyclic aromatic hydrocarbons (PAHs) contributed ∼68% of engine-out PM2.5-induced ROS generation. Implementation of a diesel oxidation catalyst (DOC) in a diesel engine could mitigate ∼76.2% of PAHs content per unit mass of PM2.5 and remove ∼28.1% of PM2.5-induced ROS generation. Furthermore, the addition of a diesel particulate filter (DPF) could stepwise reduce ∼21.7% of the PAH content and remove ∼52.2% of PM2.5-induced ROS generation. Due to the lack of aftertreatment control devices, shipping-emitted PM2.5 induced (7.4 ± 5.5)-fold higher ROS generation than those emitted from heavy-duty diesel vehicles at equal mass concentrations when burning the same diesel fuels, while the implementation of DOC and DPF devices on marine diesel engines could reduce 89.6 ± 3.6% of PM emissions and further mitigate 97.9 ± 34.6% of PM-induced ROS-adjusted emissions. These results suggest that the utilization of oxidation technologies in marine diesel engines would be an effective way to alleviate health burden risks.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.estlett.2c00069.Specifications of aftertreatment devices (Text S1); field measurements of ships (Text S2); analysis approach (Text S3); effects of aftertreatment devices on mass concentrations of PAHs (Text S4); composition discrepancies of PM2.5 emitted from ships and HDDVs (Text S5); unequal BaPeq and Creq values of PM2.5 emitted from ships and HDDVs (Text S6); specifications for the experimental engine (Table S1); parameters of tested heavy-duty diesel vehicles (Table S2); technical information on tested vessels (Table S3); substance names, abbreviations, and toxic equivalency factors (TEFs) for the 16 U.S. EPA priority PAHs (Table S4); 10 selected toxic metals, their abbreviations, and their TEFs estimated from carcinogenic risk parameters (inhalation unit risk) obtained from the U.S. EPA website (Table S5); major emission control measures used with heavy-duty diesel vehicles and ships during the past decade (Table S6); schematic diagram for a bench test of an engine and aftertreatment devices for the tested engine and sampling site locations (Figure S1); schematic diagram of the sampling system for ship emissions (Figure S2); schematic diagram of the sampling system for heavy-duty diesel vehicle emissions (Figure S3); mass concentrations of 16 PAHs per unit mass of PM2.5 observed at engine out, DOC out, DPF out, and ASC out (Figure S4); emission profiles of PM2.5 emitted from ships and heavy duty diesel vehicles (Figure S5); BaPeq and Creq values of ship- and HDDV-emitted PM2.5 (Figure S6) (PDF)This article has not yet been cited by other publications.

Chemical Composition and Size Distribution of Particulate Matters from Marine Diesel Engines with Different Fuel Oils

Emission Characteristics of Particulate Matter Emitted from 4- and 2-Stroke Marine Diesel Engines under the Background of Sulfur Emission Reduction.

Characteristics of Particulate Matter Emissions from a Low-Speed Marine Diesel Engine at Various Loads

Primary Particulate Matter Emitted from Heavy Fuel and Diesel Oil Combustion in a Typical Container Ship: Characteristics and Toxicity.

Size-segregated Characteristics of Organic Carbon (OC), Elemental Carbon (EC) and Organic Matter in Particulate Matter (PM) Emitted from Different Types of Ships in China

Characteristics of Particulate Matter Emissions for Low-Sulfur Heavy Oil Used in Low-Speed Two-Stroke Diesel Engines of Ocean-Going Ships

Finer Particle Size Distribution and Potential Higher Toxicity of Elemental Carbon and Polycyclic Aromatic Hydrocarbons Emitted by Ships after Fuel Oil Quality Improvement

Chemical Characterization and Toxicity Assessment of Fine Particulate Matters Emitted from the Combustion of Petrol and Diesel Fuels.

Impact of Fuel Aromatic Content on Soot Particle Physicochemical Properties of Marine Auxiliary Diesel Engine

Particulate Matter (PM) and Parent, Nitrated and Oxygenated Polycyclic Aromatic Hydrocarbon (PAH) Emissions of Emulsified Heavy Fuel Oil in Marine Low-Speed Main Engine

Variations and characteristics of carbonaceous substances emitted from a heavy fuel oil ship engine under different operating loads

Physical Characteristics of Particle Emissions from a Medium Speed Ship Engine Fueled with Natural Gas and Low-Sulfur Liquid Fuels

Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology

Emission Characteristics and Temporal Variation of PAHs and Their Derivatives from an Ocean-Going Cargo Vessel

More Than Concentration Reduction: Contributions of Oxidation Technologies to Alleviating Aerosol Toxicity from Diesel Engines

Particulate Matter Chemical Characteristics from a Light-Duty Diesel Engine Fueled with PODE/Diesel Blends

Size distribution of EC, OC and particle-phase PAHs emissions from a diesel engine fueled with three fuels.

Characterization of PM2.5-bound Polycyclic Aromatic Hydrocarbons and Their Derivatives (Nitro-and Oxy-Pahs) Emissions from Two Ship Engines under Different Operating Conditions.

Pm and Parent, Nitrated- and Oxygenated-Pahs Emissions of Emulsified Heavy Fuel Oil in Marine Low-Speed Main Engine

Particle Emissions from a Marine Diesel Engine Burning Two Kinds of Sulphur Diesel Oils with an EGR & Scrubber System: Size, Number & Mass

Chemical and toxicological characterization of particulate emissions from diesel vehicles