Abstract:Platinum, Silver-Platinum embedded Zirconia (Pt/Ag-Pt ZrO2) thin films have been fabricated on silicon wafers and glass substrates using the plasma co-sputtering method. Zirconia thin films are of significant technological importance due to their remarkable electrical, optical, and mechanical properties, as well as their high melting temperature of 2715°C, which makes them increasingly attractive for various applications. In this study, ZrO2 thin films were deposited for 3 minutes, followed by the deposition of Pt-Ag/Pt onto the fabricated zirconia thin films, with deposition times ranging from 15 to 60 seconds. The varying deposition times of Pt-Ag/Pt influenced the optical and electronic properties of the thin films due to alterations in their surface roughness. The characteristics of the grown zirconia and Pt/Ag-Pt sputtered zirconia nanostructures were investigated using Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), UV-visible spectroscopy, and Photoluminescence spectroscopy. The optical transmittance of these thin films was examined across the visible and near-infrared spectral ranges. The investigation revealed various properties, such as enhanced photoluminescence and the emergence of new peaks in the visible range spectra. Plasmonic peaks were induced, and an increase in the sharpness of these peaks was observed between 403.15 nm and 512.10 nm for the Pt/Ag-Pt deposited samples. This enhancement in photoluminescence is attributed to the plasmonic properties of Pt-Ag nanoparticles on the zirconia thin film. The study demonstrates that these optically tuned thin film coatings, with their enhanced photoluminescence properties, can significantly improve the heat-resistance capacity of devices, mitigating issues related to overheating and device shutdown.

Pronounced Effects of Argon Plasma Etching on Photoluminescence and Schottky Contact Properties of Pt/ZnO Nanorods

Synthetic and Effect of Annealing on the Luminescent Properties of Zno Nanowire

Effect of Electrodeposition Time on Microstructure, Wettability and Optical Properties of ZnO Nanorod Arrays

Effect of Rapid Thermal Annealing Ambient on Photoluminescence of Zno Films

Preparation and Photoluminescence of ZnO with Nanostructure by Hollow-Cathode Discharge

Enhancement in Photoluminescence of Pt/Ag-Pt Embedded ZrO2 Thin Films by Plasma Co-sputtering

Effects of Oxygen Plasma Etching and Post-Annealing on Pt Schottky Contact on Mg-Doped Inzno

Effects of Schottky Contact and Ohmic Contact on the Emission Properties of Metal-Covered Zno Nanorod Arrays

Tunable Photoluminescence Properties of Well-Aligned ZnO Nanorod Array by Oxygen Plasma Post-Treatment

Surface-Plasmon Mediated Photoluminescence Enhancement of Pt-Coated Zno Nanowires by Inserting an Atomic-Layer-Deposited Al2o3 Spacer Layer

Plasma etching of III-V semiconductors and mechanism of crystalline damage

Enhanced emission and surface modification in ZnO treated with Ar, H, and O plasmas

Enhanced Near-Band-edge Emission and Field Emission Properties from Plasma Treated ZnO Nanowires

Photoluminescence and Low-Threshold Lasing of ZnO Nanorod Arrays.

Plasma etching ofⅢ-Ⅴsemiconductors and mechanism of crystalline damage

Photoluminescence enhancement of ZnO nanowire arrays by atomic layer deposition of ZrO2 layers and thermal annealing.

The effect of cold plasma generated from argon gas on the optical band gap of nanostructures

The surface-plasmon-resonance and band bending effects on the photoluminescence enhancement of Ag-decorated ZnO nanorods

Size-Dependent Surface Effects on the Photoluminescence in Zno Nanorods

Surface passivation effect on the photoluminescence of ZnO nanorods

Negative thermal quenching of photoluminescence in annealed ZnO-Al2O3 core-shell nanorods.