Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

Experimental and Numerical Transport AC Losses in a Four-Strand Roebel Cable Bifilar Stack

Estimation of Self-Field Critical Current and Transport-Magnetization AC Losses of Roebel Cables

Electromagnetic Assessment and AC Losses of Triaxial Cables with Multiple 2G-HTS Layers Per Phase

Analysis of AC Transport Loss in Conductor on Round Core Cables

Current Sharing in Superconducting REBCO Cables-FEM Modeling

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

3D FEM Modelling of CORC Commercial Cables with Bean's like magnetization currents and its AC-Losses Behaviour

Calculation and Measurement of Transport AC Loss of Re BCO CORC Cables for Electric Aircraft

AC loss in ReBCO pancake coils and stacks of them: modelling and measurement

AC Loss and Contact Resistance In Copper-Stabilized Nb3Al Rutherford Cables with and without a Stainless Steel Core

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

Numerical Simulations on the AC Loss of REBCO Stacks under Rotating Magnetic Fields

AC Loss Reduction in REBCO Coated Conductors Using the Hexagonal Arrangement Cabling Method

Experimental and Numerical Study on the Transport AC Loss of Bent CORC Cables

The current unbalance in stacked REBCO tapes -- simulations based on a circuit grid model

AC losses in HTS sector shaped high-current conductors for fusion coils

Ac Loss Modelling and Experiment of Two Types of Low-Inductance Solenoidal Coils

An Equivalent Cross-Section Model for CORC Cable to Achieve Accurate AC Loss Estimations

Numerical simulations of electromagnetic behavior in CORC cable based on a modified H - <i>?</i> formulation

Simulation of Rutherford Cable AC Loss and Magnetization with the Coupled Axial and Transverse Currents Method

AC Loss and Contact Resistance in Highly Flexible Rebco Cable for Fusion Applications