Abstract:Introduction . Blood pressure (BP) has been a potential risk factor for cardiovascular diseases. BP measurement is one of the most useful parameters for early diagnosis, prevention, and treatment of cardiovascular diseases. At present, BP measurement mainly relies on cuff-based techniques that cause inconvenience and discomfort to users. Although some of the present prototype cuffless BP measurement techniques are able to reach overall acceptable accuracies, they require an electrocardiogram (ECG) and a photoplethysmograph (PPG) that make them unsuitable for true wearable applications. Therefore, developing a single PPG-based cuffless BP estimation algorithm with enough accuracy would be clinically and practically useful. Methods . The University of Queensland vital sign dataset (online database) was accessed to extract raw PPG signals and its corresponding reference BPs (systolic BP and diastolic BP). The online database consisted of PPG waveforms of 32 cases from whom 8133 (good quality) signal segments (5 s for each) were extracted, preprocessed, and normalised in both width and amplitude. Three most significant pulse features (pulse area, pulse rising time, and width 25%) with their corresponding reference BPs were used to train and test three machine learning algorithms (regression tree, multiple linear regression (MLR), and support vector machine (SVM)). A 10-fold cross-validation was applied to obtain overall BP estimation accuracy, separately for the three machine learning algorithms. Their estimation accuracies were further analysed separately for three clinical BP categories (normotensive, hypertensive, and hypotensive). Finally, they were compared with the ISO standard for noninvasive BP device validation (average difference no greater than 5 mmHg and SD no greater than 8 mmHg). Results . In terms of overall estimation accuracy, the regression tree achieved the best overall accuracy for SBP (mean and SD of difference: −0.1 ± 6.5 mmHg) and DBP (mean and SD of difference: −0.6 ± 5.2 mmHg). MLR and SVM achieved the overall mean difference less than 5 mmHg for both SBP and DBP, but their SD of difference was >8 mmHg. Regarding the estimation accuracy in each BP categories, only the regression tree achieved acceptable ISO standard for SBP (−1.1 ± 5.7 mmHg) and DBP (−0.03 ± 5.6 mmHg) in the normotensive category. MLR and SVM did not achieve acceptable accuracies in any BP categories. Conclusion . This study developed and compared three machine learning algorithms to estimate BPs using PPG only and revealed that the regression tree algorithm was the best approach with overall acceptable accuracy to ISO standard for BP device validation. Furthermore, this study demonstrated that the regression tree algorithm achieved acceptable measurement accuracy only in the normotensive category, suggesting that future algorithm development for BP estimation should be more specific for different BP categories.

Blood Pressure Prediction Based on Pattern Classification

A Refined Blood Pressure Estimation Model Based on Single Channel Photoplethysmography.

Predicting blood pressure from physiological index data using the SVR algorithm

Regression or Classification? Reflection on BP prediction from PPG data using Deep Neural Networks in the scope of practical applications

Cuff-Less Blood Pressure Prediction Based on Photoplethysmography and Modified ResNet

Blood pressure prediction based on multi-sensor information fusion of electrocardiogram, photoplethysmography, and pressure pulse waveform

Blood Pressure Estimation Using Photoplethysmography Only: Comparison between Different Machine Learning Approaches

A SVM Method for Continuous Blood Pressure Estimation from a PPG Signal.

Cuff-less blood pressure estimation from photoplethysmography signal and electrocardiogram

Cascade forest regression algorithm for non-invasive blood pressure estimation using PPG signals

A Benchmark Study of Machine Learning for Analysis of Signal Feature Extraction Techniques for Blood Pressure Estimation Using Photoplethysmography (PPG)

Central Blood Pressure Estimation From Distal PPG Measurement Using Semiclassical Signal Analysis Features

Estimating Blood Pressure from Photoplethysmogram Signal and Demographic Features using Machine Learning Techniques

Examining the challenges of blood pressure estimation via photoplethysmogram

Photoplethysmography and Deep Learning: Enhancing Hypertension Risk Stratification

"Can't Take the Pressure?": Examining the Challenges of Blood Pressure Estimation via Pulse Wave Analysis

A Novel Neural Network Model for Blood Pressure Estimation Using Photoplethesmography without Electrocardiogram

A Novel Blood Pressure Estimation Method with the Combination of Long Short Term Memory Neural Network and Principal Component Analysis Based on PPG Signals

Key Feature Selection and Model Analysis for Blood Pressure Estimation from Electrocardiogram, Ballistocardiogram and Photoplethysmogram

Study of cuffless blood pressure estimation method based on multiple physiological parameters

Preprocessing PPG and ECG Signals to Estimate Blood Pressure Based on Noninvasive Wearable Device