Abstract:Introduction . Blood pressure (BP) has been a potential risk factor for cardiovascular diseases. BP measurement is one of the most useful parameters for early diagnosis, prevention, and treatment of cardiovascular diseases. At present, BP measurement mainly relies on cuff-based techniques that cause inconvenience and discomfort to users. Although some of the present prototype cuffless BP measurement techniques are able to reach overall acceptable accuracies, they require an electrocardiogram (ECG) and a photoplethysmograph (PPG) that make them unsuitable for true wearable applications. Therefore, developing a single PPG-based cuffless BP estimation algorithm with enough accuracy would be clinically and practically useful. Methods . The University of Queensland vital sign dataset (online database) was accessed to extract raw PPG signals and its corresponding reference BPs (systolic BP and diastolic BP). The online database consisted of PPG waveforms of 32 cases from whom 8133 (good quality) signal segments (5 s for each) were extracted, preprocessed, and normalised in both width and amplitude. Three most significant pulse features (pulse area, pulse rising time, and width 25%) with their corresponding reference BPs were used to train and test three machine learning algorithms (regression tree, multiple linear regression (MLR), and support vector machine (SVM)). A 10-fold cross-validation was applied to obtain overall BP estimation accuracy, separately for the three machine learning algorithms. Their estimation accuracies were further analysed separately for three clinical BP categories (normotensive, hypertensive, and hypotensive). Finally, they were compared with the ISO standard for noninvasive BP device validation (average difference no greater than 5 mmHg and SD no greater than 8 mmHg). Results . In terms of overall estimation accuracy, the regression tree achieved the best overall accuracy for SBP (mean and SD of difference: −0.1 ± 6.5 mmHg) and DBP (mean and SD of difference: −0.6 ± 5.2 mmHg). MLR and SVM achieved the overall mean difference less than 5 mmHg for both SBP and DBP, but their SD of difference was >8 mmHg. Regarding the estimation accuracy in each BP categories, only the regression tree achieved acceptable ISO standard for SBP (−1.1 ± 5.7 mmHg) and DBP (−0.03 ± 5.6 mmHg) in the normotensive category. MLR and SVM did not achieve acceptable accuracies in any BP categories. Conclusion . This study developed and compared three machine learning algorithms to estimate BPs using PPG only and revealed that the regression tree algorithm was the best approach with overall acceptable accuracy to ISO standard for BP device validation. Furthermore, this study demonstrated that the regression tree algorithm achieved acceptable measurement accuracy only in the normotensive category, suggesting that future algorithm development for BP estimation should be more specific for different BP categories.

Cuff-less blood pressure estimation from photoplethysmography signal and electrocardiogram

Central Blood Pressure Estimation From Distal PPG Measurement Using Semiclassical Signal Analysis Features

Key Feature Selection and Model Analysis for Blood Pressure Estimation from Electrocardiogram, Ballistocardiogram and Photoplethysmogram

Noninvasive and Cuffless Blood Pressure Estimation Using Photoplethysmography Index

Study of cuffless blood pressure estimation method based on multiple physiological parameters

Novel Blood Pressure Estimation Method Using Single Photoplethysmography Feature

Boosting Algorithms based Cuff-less Blood Pressure Estimation from Clinically Relevant ECG and PPG Morphological Features

Cuffless Blood-Pressure Estimation Method Using A Heart-Rate Variability-Derived Parameter

A Multi-Parameter Fusion Method for Cuffless Continuous Blood Pressure Estimation Based on Electrocardiogram and Photoplethysmogram

A continuous cuffless blood pressure measurement from optimal PPG characteristic features using machine learning algorithms

A Feature Exploration Methodology for Learning Based Cuffless Blood Pressure Measurement Using Photoplethysmography.

Towards accurate estimation of cuffless and continuous blood pressure using multi-order derivative and multivariate photoplethysmogram features

Blood Pressure Estimation Using Photoplethysmography Only: Comparison between Different Machine Learning Approaches

A Novel Interpretable Feature Set Optimization Method in Blood Pressure Estimation Using Photoplethysmography Signals

Robust Feature Selection for BP Estimation in Multiple Populations: Towards Cuffless Ambulatory BP Monitoring

Continuous Blood Pressure Estimation From Electrocardiogram and Photoplethysmogram During Arrhythmias

Feature Exploration for Knowledge-guided and Data-driven Approach Based Cuffless Blood Pressure Measurement

Cuff-less blood pressure measurement based on hybrid feature selection algorithm and multi-penalty regularized regression technique

A Refined Blood Pressure Estimation Model Based on Single Channel Photoplethysmography.

Multi-Dimensional Feature Combination Method for Continuous Blood Pressure Measurement Based on Wrist PPG Sensor.

Cuffless Blood Pressure Estimation Using Calibrated Cardiovascular Dynamics in the Photoplethysmogram