Abstract:An increase in hydrostatic stress improves the plasticity of metallic materials. However, for some special components, such as large thin-walled components with high ribs, excessive hydrostatic stress can cause several problems that make it impossible to prepare such components using plastic forming methods. In this study, the effect of hydrostatic stress on the deformation behavior of large thin-walled components with high ribs was investigated using a combination of numerical simulations and theoretical derivations. The results indicated that excessive hydrostatic stress leads to die failure, causing metal flow difficulties, uneven deformation, inconsistent mechanical properties, and reduced forming accuracy. Therefore, a low-hydrostatic-stress extrusion method was proposed by adjusting the contact friction, metal flow direction and displacement, and force boundary conditions to reduce the hydrostatic compressive stress. These principles are mainly reflected in the following three aspects: First, the size of the difficult deformation zone was reduced by changing the friction conditions from dry friction to fluid friction or boundary friction to reduce the frictional resistance. Second, the high-stress zone was eliminated by changing the metal flow direction, adjusting the strain state from unidirectional to multi-directional flow, shortening the metal flow path, and reducing the metal flow resistance. Third, the strong compressive stress state in the three directions was weakened by regulating the force boundary conditions and changing the loading method from one-way extrusion to multi-directional loading. Based on these principles, a series of new forming technologies have been developed, such as actively counteracting frictional resistance, slotting, and ditching on dies for long-lasting lubrication, multi-directional short-range metal flow, drawing-assisted extrusion, and multi-directional active loading. The adoption of these technologies realizes the labor-efficient formation of large thin-walled components with high ribs and provides the formed members with high precision and uniform mechanical properties.

Multi-Mode Damage and Fracture Mechanisms of Thin-Walled Tubular Parts with Cross Inner Ribs Manufactured Via Flow Forming

Deformation mechanism of ZK61 magnesium alloy cylindrical parts with longitudinal inner ribs during hot backward flow forming

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Multi-pass rolling-extrusion of large-scale thin-walled square tube with longitudinal inner ribs

Experimental and numerical investigations into the ductile fracture during the forming of flat-rolled 5083-O aluminum alloy sheet

Investigations on Failure-to-fracture Mechanism and Prediction of Forming Limit for Aluminum Alloy Incremental Forming Process

Microstructure and Mechanical Properties Development of Micro Channel Tubes in Extrusion, Rolling and Brazing

Sheet Metal Forging Process for Thin-Walled Structures with Crossed Ribs: Process Design, Simulation and a Forming Experiment

Fold Defects Mechanism of Aluminum Alloy Thin-Walled Stiffened Cylinders During Flow Forming

Research on local loading method for an aluminium-alloy hatch with cross ribs and thin webs

Study of microstructure evolution of magnesium alloy cylindrical part with longitudinal inner ribs during hot flow forming by coupling ANN-modified CA and FEA

Study of Microstructure and Mechanical Properties by Torsional Behavior in Axial Closed Die Rolling Forming

Deformation Behavior of Convolute Thin-Walled AA6061-T6 Rectangular Tubes Manufactured by the Free Bending Forming Technology

Microstructure and Mechanical Properties of Thin-Wall and High-Rib Parts of AM60B Mg Alloy Formed by Double Control Forming and Die Casting under the Optimal Conditions

Effect of cold process drawing parameters on the formability and microstructure of ribbed cladding tubes

Deformation behavior under die partitioning boundary during titanium alloy large-scale rib-web component forming by isothermal local loading

The Interactive Effect of Microstructure and Stress State on the Microscopic Damage Development of Aluminum Alloy Tailor-Welded Blank

Research on the Influence of Ultrasonic on the Inner Rib’s Surface Morphology of Ribbed Cylindrical Parts in Flow Spinning Process

Multi-pass Spinning of Thin-Walled Tubular Part with Longitudinal Inner Ribs

Flow defects of rib-web components in isothermal local-loading forming process

Investigation on low hydrostatic stress extrusion technology for forming of large thin-walled components with high ribs