Abstract:<section class="article-section__content"><p>A design study was undertaken of a 100 kW natural gas solid oxide fuel cell (SOFC)/gas turbine (GT) hybrid system to evaluate the impacts of the reforming process under a broad range of SOFC fuel utilizations. An equilibrium reformer model and a one-dimensional SOFC model are employed to perform system study for this hybrid, while balance of plant model is built in Ebsion to simulate the associated performance of GT cycle. Fifty design cases with varied external fuel reforming temperatures are analyzed based on different SOFC fuel utilization levels. With the decrease of reforming temperature, optimal fuel utilization in terms of efficiency shift from 90% with external reforming to 60% with internal reforming. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy. And the feasibility of achieving high efficiencies in the hybrid system with thermally integrated external reforming will be explored in our future work.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><p>Both fuel reforming process and fuel utilization could affect the heat and energy balance in the hybrid gas solid oxide fuel cell (SOFC)-gas turbine (GT) system. However, the optimal design condition considering different fuel reforming approaches and SOFC fuel utilization levels was not determined in the literature. In addition, appropriate integration strategies, used to balance the heat and power between the two subsystems (SOFC and GT), are imperative under different fuel reforming approaches and SOFC fuel utilization levels. But, the feasibility of those thermal integration strategies has not been examined in existing studies. This work studied the coupling effects of SOFC fuel utilization and fuel reforming process on system performance of a natural gas hybrid SOFC/GT cycle. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy.</p></section>

Effect of Different Operating Strategies for a SOFC-GT Hybrid System Equipped with Anode and Cathode Ejectors

Control Strategy Design for a SOFC-GT Hybrid System Equipped with Anode and Cathode Recirculation Ejectors

A Novel Control Strategy with an Anode Variable Geometry Ejector for a SOFC-GT Hybrid System

Comparison of Different Fuel Cell Temperature Control Systems in an Anode and Cathode Ejector-Based SOFC-GT Hybrid System

Study on Control Strategy for a SOFC-GT Hybrid System with Anode and Cathode Recirculation Loops

Performance Evaluation of an SOFC-GT Hybrid System with Ejectors for the Anode and Cathode Recirculations

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Coupling Effect of Operating Parameters on Performance of a Biogas-Fueled Solid Oxide Fuel Cell/gas Turbine Hybrid System

A Novel SOFC Thermal Management Strategy of SOFC-GT Hybrid System With Anode and Cathode Control Loops

Anode Gas Recirculation Behavior of A Fuel Ejector in Hybrid Solid Oxide Fuel Cell Systems: Performance Evaluation in Three Operational Modes

Part-load, Startup, and Shutdown Strategies of a Solid Oxide Fuel Cell-Gas Turbine Hybrid System

High performance ejector enhanced by heat exchanger in Solid Oxide Fuel Cell anode recirculation system

Comparison of Three Different Control Strategies for Load-Change and Attenuation of Solid Oxide Fuel Cell System

Design and Sensitivity Analysis of a Multistage Solid Oxide Fuel Cell Hybrid System with an Inter-Cooled-recuperated Gas Turbine and Organic Rankine Cycle

Effect of Operating Parameters on Performance and Safety Evaluation of a Biogas-fueled SOFC/GT Hybrid System

Employing a Booster/ejector-Assisted Organic Flash Cycle to Heat Recovery of SOFC System; Exergy- and Economic-Based Optimization

Transient Performance Analysis of a Solid Oxide Fuel Cell During Power Regulations with Different Control Strategies Based on a 3D Dynamic Model

Thermal Management of Bypass Valves for Temperature Difference Elimination in a 5 Kw Multi-Stack Solid Oxide Fuel Cell System

Coupling impacts of SOFC operating temperature and fuel utilization on system net efficiency in natural gas hybrid SOFC/GT system

Cycle Analysis of an Integrated Solid Oxide Fuel Cell and Recuperative Gas Turbine with an Air Reheating System

Coupling effects of fuel reforming process and fuel utilization on the system performance of a natural gas solid oxide fuel cell/gas turbine hybrid system