Abstract:<section class="article-section__content"><p>A design study was undertaken of a 100 kW natural gas solid oxide fuel cell (SOFC)/gas turbine (GT) hybrid system to evaluate the impacts of the reforming process under a broad range of SOFC fuel utilizations. An equilibrium reformer model and a one-dimensional SOFC model are employed to perform system study for this hybrid, while balance of plant model is built in Ebsion to simulate the associated performance of GT cycle. Fifty design cases with varied external fuel reforming temperatures are analyzed based on different SOFC fuel utilization levels. With the decrease of reforming temperature, optimal fuel utilization in terms of efficiency shift from 90% with external reforming to 60% with internal reforming. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy. And the feasibility of achieving high efficiencies in the hybrid system with thermally integrated external reforming will be explored in our future work.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><p>Both fuel reforming process and fuel utilization could affect the heat and energy balance in the hybrid gas solid oxide fuel cell (SOFC)-gas turbine (GT) system. However, the optimal design condition considering different fuel reforming approaches and SOFC fuel utilization levels was not determined in the literature. In addition, appropriate integration strategies, used to balance the heat and power between the two subsystems (SOFC and GT), are imperative under different fuel reforming approaches and SOFC fuel utilization levels. But, the feasibility of those thermal integration strategies has not been examined in existing studies. This work studied the coupling effects of SOFC fuel utilization and fuel reforming process on system performance of a natural gas hybrid SOFC/GT cycle. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy.</p></section>

Effect of Operating Parameters on Performance and Safety Evaluation of a Biogas-fueled SOFC/GT Hybrid System

Performance Analysis of SOFC/micro-GT Hybrid System

SOFC-GT Hybrid System Simulation Using a Distributed-Parameter SOFC Model

Coupling effects of fuel reforming process and fuel utilization on the system performance of a natural gas solid oxide fuel cell/gas turbine hybrid system

Performance Analysis of Coal Gasification-SOFC Hybrid Systems

Coupling impacts of SOFC operating temperature and fuel utilization on system net efficiency in natural gas hybrid SOFC/GT system

Performance Analysis and Optimization of SOFC/GT Hybrid Systems: A Review

Macroscopic modeling of solid oxide fuel cell (SOFC) and model-based control of SOFC and gas turbine hybrid system

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

High efficiencies with low fuel utilization and thermally integrated fuel reforming in a hybrid solid oxide fuel cell gas turbine system

Dynamic Simulation of a Pressurized 220kW Solid Oxide Fuel-Cell–Gas-Turbine Hybrid System: Modeled Performance Compared to Measured Results

Mechanical equilibrium operation integrated modelling of hybrid SOFC – GT systems: Design analyses and off-design optimization

Energy, exergy, economic, and life cycle environmental analysis of a novel biogas-fueled solid oxide fuel cell hybrid power generation system assisted with solar thermal energy storage unit

Study on the Operating Parameters of the 10 Kw SOFC-CHP System with Syngas

Biomass Steam Gasification, High-Temperature Gas Cleaning, and SOFC Model: A Parametric Analysis

Study of MW-scale biogas-fed SOFC-WGS-TSA-PEMFC hybrid power technology as distributed energy system: Thermodynamic, exergetic and thermo-economic evaluation

Analysis of a biogas-fed SOFC CHP system based on multi-scale hierarchical modeling

Design and optimization of a solid oxide fuel cell-inverted gas turbine integrated system with zero carbon emission for distributed cogeneration

Comprehensive performance assessment of a novel biomass-based CCHP system integrated with SOFC and HT-PEMFC

Performance analysis and multi-objective optimization of a novel poly-generation system integrating SOFC/GT with SCO2/HDH/ERC

Effect of steam reinjection mass flow rate on the SOFC–GT system with steam reinjection