Abstract:Solid Oxide Fuel Cell (SOFC) is a developing energy conversion technology featuring high efficiency, power density, durability, and fuel compatibility. With these advantages, SOFCs are combined frequently with heat engines such as gas turbines, for higher system efficiency and power density. In practice, SOFCs are often required to deliver certain power. Considering economical aspects, power generation efficiency is critical to the running cost of energy conversion systems. However, high power and high efficiency are likely reached under different operating conditions. For example, to meet peak power demands, higher operating currents and fuel flowrates are necessary, while SOFCs are generally more energy efficient at lower current densities and fuel flowrates. Hence, the ideal operating condition is the solution to a power-constrained efficiency optimization problem. Moreover, SOFCs degrade as they operate, introducing gradual changes to SOFC characteristics. Thus, the optimization needs to be solved dynamically. To analyze the above-mentioned problem, a 10 cm by 10 cm planar SOFC was repeatedly tested for polarization characterizations and electrochemical impedance spectra. A 2-dimentional multi-physics model was developed and calibrated using both polarization and impedance data. To account for the lower open circuit voltage at lower fuel flowrates, an equivalent leakage current is included in the model. The model was thereafter employed for efficiency optimization given power constraints. At each required power output, the optimal fuel flowrate and the corresponding voltage, current, and efficiency was calculated. The electrical efficiency peaks globally at around 0.1 Standard Liter per Minute (SLM) hydrogen flowrate, while at higher power, the optimal efficiency is reached at fuel utilizations between 65% and 90%. Accounting for degradation in terms of growing ohmic resistance and decreasing electrode exchange current densities, the optimal efficiency is reached at lowering fuel utilization and lowering voltage, which may result in local oxidization of the anode. Moreover, an easy and straight-forward way was proposed to estimate the optimal fuel flowrate given polarization data. Further studies involving the safety constraints will be carried out in the future. Figure 1

Transient Performance Analysis of a Solid Oxide Fuel Cell During Power Regulations with Different Control Strategies Based on a 3D Dynamic Model

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Elucidating the dynamic transport phenomena of solid oxide fuel cells according to rapid electrical load change operation

The Observation of Performance Trends by Numerical Simulation with Different Parameters in a Nonlinear Reversible Solid Oxide Cell System

Comparison of Three Different Control Strategies for Load-Change and Attenuation of Solid Oxide Fuel Cell System

Control Loop Design and Control Performance Study on Direct Internal Reforming Solid Oxide Fuel Cell

An Optimization and Fast Load-Oriented Control for Current-Based Solid Oxide Fuel Cell System

The dynamic response of solid oxide fuel cell fueled by syngas during the operating condition variations

Evaluating the influence of working parameters on the efficiency of a solid oxide fuel cell by conducting sensitivity analysis using electrochemical and thermodynamic modeling

Dynamic modeling of reversible solid oxide cell stack and control strategy development

Effect of the Reactant Transportation on Performance of a Planar Solid Oxide Fuel Cell

Feedforward and Desired Dynamic Equation Control for Solid Oxide Fuel Cell System.

Multiphysics Simulation of a Solid Oxide Fuel Cell Based on COMSOL Method

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

Evaluating the effectiveness of the modified multi-scale multi-physics coupled model for solid oxide fuel cells: A comparative analysis

A Practical Compound Controller Design for Solid Oxide Fuel Cells

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Efficiency Optimization of SOFC Subject to Degradation and Minimum Power Constraint