Comparative Investigation on the Tribocorrosion Resistance of Ti6Al4V and 60NiTi Alloys in Simulated Seawater Environment
Chao Yan,Yajun Zhang,Qunfeng Zeng,Xijing Zhu,Zhe Tong,Xinyu Feng
DOI: https://doi.org/10.1016/j.wear.2024.205423
IF: 4.695
2024-05-26
Wear
Abstract:The Ti6Al4V alloy is extensively utilized in critical marine equipment components due to its low density, high specific strength, and exceptional corrosion resistance in marine environments. However, its low hardness and inadequate wear resistance pose challenges in meeting the urgent demand for prolonged service life of relative motion friction pairs under complex wear and corrosion conditions. As a newly developed lightweight friction pair material, hardened 60NiTi is considered highly desirable owing to its combination of high hardness, high compressive strength, and excellent corrosion resistance. Nevertheless, the tribocorrosion properties of 60NiTi compared to those of Ti6Al4V are not yet fully comprehended. The present study conducted a series of sliding wear tests using a ball-on-plate configuration in artificial seawater environment to compare the response of 60NiTi with Ti6Al4V. In order to gain a comprehensive understanding of the factors contributing to the divergence in tribocorrosion response between both materials, further analysis was performed on the wear track subsurface and transfer film using focused ion beam-scanning electron microscopy, Raman spectroscopy, and x-ray photoelectron spectroscopy respectively. The 60NiTi demonstrates significantly enhanced wear resistance in artificial seawater compared to Ti6Al4V, attributed to its combination of high hardness and excellent corrosion resistance. However, Ti6Al4V exhibits a lower friction coefficient (∼0.30) than 60NiTi (∼0.45) due to the formation of a stable transfer film primarily composed of SiO 2 , Al(OH) 3 , and Al 2 O 3 .
materials science, multidisciplinary,engineering, mechanical