Abstract:A novel calcium-based synthetic CO2 sorbent with hollow core-shell structure was prepared by a carbon microsphere template route where carbide slag, alumina cement and glucose were employed as the low-cost calcium precursor, support and carbon source, respectively. The effects of the alumina cement addition, the precalcination temperature during the preparation process, the carbon template addition and calcination conditions on CO2 capture performances of the calcium-based synthetic sorbents were studied during calcium looping cycles. The synthetic sorbent containing 5 wt.% alumina cement possesses the highest CO2 capture capacity during calcium looping cycles, which is mainly composed of CaO and Ca12Al14O33. The CO2 capture capacities of the synthetic sorbent under mild and severe calcination conditions can retain 0.37 and 0.29 g/g after 20 cycles, which are 57% and 99% higher than those of carbide slag under the same conditions, respectively. The synthetic sorbent possesses a hollow micro-sphere morphology with a nano-structured shell and meso-porous structure, which decreases the diffusion resistance of CO2. Periodic density functional theory (DFT) calculations are used to explain why Ca12Al14O33 can effectively retard both agglomeration and sintering of the synthetic sorbent. The hollow core-shell model is proposed to explain the CO2 capture mechanism of the synthetic sorbent. For the same CO2 capture efficiency, the energy consumption in the calciner using the synthetic sorbent is much lower than those using carbide slag and natural limestone. This work designs a good method to prepare the hollow sphere-structured synthetic sorbents with high CO2 capture capacity and provides a promising way to integrate efficient CO2 capture with the utilization of industrial waste.

Investigation of Y2O3/MxOy-Incorporated Ca-Based Sorbents for Efficient and Stable CO2 Capture at High Temperature

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Investigation of Y2O3/MgO-modified Extrusion-Spheronized CaO-based Pellets for High-Temperature CO2 Capture

Investigation on a Novel CaO–Y2O3 Sorbent for Efficient CO2 Mitigation

High Temperature CO2 Capture on Novel Yb2O3-Supported CaO-Based Sorbents

Wet Mixing Combustion Synthesis of CaO-based Sorbents for High Temperature Cyclic CO2 Capture

CO2 Capture Performance of CaO-Based Sorbents Prepared by a Sol–Gel Method

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture

Optimization of the structural characteristics of CaO and its effective stabilization yield high-capacity CO2 sorbents

Characteristics and performance of CaO-based high temperature CO2 sorbents derived from a sol–gel process with different supports

New insights into stabilizing mechanism of Ca9Al6O18 stabilizing Ca-based sorbents for CO2 cyclic capture under mild conditions

Structure and Surface Insight into a Temperature-Sensitive CaO-based CO2 Sorbent

Enhancing Calcium Oxide-Based Carbon Capture Cycles with Ion-Doped Spinels

A green and scalable synthesis of highly stable Ca-based sorbents for CO2 capture

Synthesis of CaO-based Sorbents Through Incorporation of Alumina/aluminate and Their CO2 Capture Performance

Development of Highly Effective CaO@Al2O3 with Hierarchical Architecture CO2 Sorbents Via a Scalable Limited-Space Chemical Vapor Deposition Technique

CO2 Capture Performance of Calcium-Based Synthetic Sorbent with Hollow Core-Shell Structure under Calcium Looping Conditions

Manufacture of Calcium-Based Sorbents for High Temperature Cyclic CO2 Capture Via a Sol–gel Process