Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

CTAB-assisted microemulsion synthesis of unique 3D network nanostructured polypyrrole presenting significantly diverse capacitance performances in different electrolytes

Enhanced electrochemical charge storage performance by doping of copper phthalocyanine-3,4′,4″,4‴-tetrasulfonic acid tetrasodium salt into polypyrrole/multi-walled carbon nanotubes 3D-nanostructured electrodes

Conducting polypyrrole with nanoscale hierarchical structure

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

Soft Template Interfacial Growth of Novel Ultralong Polypyrrole Nanowires for Electrochemical Energy Storage

A Facile Strategy of Polypyrrole Nanospheres Grown on Ti3C2-MXene Nanosheets As Advanced Supercapacitor Electrodes

A Nanofibrous Polypyrrole Membrane with an Ultrahigh Areal Specific Capacitance and Improved Energy and Power Densities

Enhanced Electrochemical Performances of Organ-Like Ti3C2 MXenes/polypyrrole Composites As Supercapacitors Electrode Materials

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Enhanced Capacitance of Rectangular-Sectioned Polypyrrole Microtubes As the Electrode Material for Supercapacitors

Highly Dispersed Carbon Nanotube/polypyrrole Core/shell Composites with Improved Electrochemical Capacitive Performance

Preparation, Characterization and Anion Exchange Properties of Polypyrrole/Carbon Nanotube Nanocomposites

Toward a high specific power and high stability polypyrrole supercapacitors

Fabrication of a flexible porous polypyrrole film with a 3D micro-nanostructure and its electrochemical properties

Synthesis and Electrochemical Performance of Polypyrrole-Hierarchical Porous Carbons Nanocomposites

Facile Synthesis and Electrochemical Capacitance of Composites of Polypyrrole/multi-Walled Carbon Nanotubes

Synthesis of polypyrrole–titanium dioxide brush-like nanocomposites with enhanced supercapacitive performance

Template‐free electrochemically polymerized polypyrrole nanowires and their application in flexible solid‐state supercapacitors

Enzymatic synthesis of biocompatible polypyrrole with enhanced electrochemical properties for supercapacitors

Hydrothermal Synthesis of Polypyrrole/MoS2 Intercalation Composites for Supercapacitor Electrodes

Flexible Electrochemical Capacitors Based on Polypyrrole/carbon Fibers Via Chemical Polymerization of Pyrrole Vapor