Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication of a flexible porous polypyrrole film with a 3D micro-nanostructure and its electrochemical properties

A Porous and Interconnected Polypyrrole Film with High Conductivity and Ion Accessibility As Electrode for Flexible All‐Solid‐State Supercapacitors

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

A Free-Standing Polymer Polypyrrole/Cellulose Composite Film via Spatial-Confined Interfacial Electrodeposition for Flexible Supercapacitors

Electrodeposition of Polypyrrole on He Plasma Etched Carbon Nanotube Films for Electrodes of Flexible All-Solid-state Supercapacitor

Fabrication on the Flexible Supercapacitor Based on the Polypyrrole Deposited on Polyethylene/Polypropylene Non-Woven Film

Facile synthesis of polypyrrole nanowires for high-performance supercapacitor electrode materials

Flexible core/shelled PPy@PANI nanotube porous films for hybrid supercapacitors

Tailorable Polypyrrole Nanofilms with Exceptional Electrochemical Performance for All-Solid-State Flexible Supercapacitors

Polypyrrole-coated paper for flexible solid-state energy storage

Highly flexible polypyrrole electrode with acanthosphere-like structures for energy storage and actuator applications

Polypyrrole film based flexible supercapacitor: mechanistic insight into influence of acid dopants on electrochemical performance

Interface Guide: In-situ Integrating MoS2 Nanosheets into Highly Ordered Polypyrrole Film for High Performance Flexible Supercapacitor Electrodes

Pulsed electrochemical fabrication of graphene/polypyrrole composite gel films for high performance and flexible supercapacitors

Uniform Polypyrrole Electrodeposition Triggered by Phytic Acid-Guided Interface Engineering for High Energy Density Flexible Supercapacitor

Polypyrrole-pen Ink/polydopamine Electrode for Flexible All-in-one Supercapacitor

Highly Flexible, Freestanding Supercapacitor Electrode with Enhanced Performance Obtained by Hybridizing Polypyrrole Chains with MXene

High‐Performance and Breathable Polypyrrole Coated Air‐Laid Paper for Flexible All‐Solid‐State Supercapacitors

Preparation and properties of polypyrrole/polyamide 6 nanocomposite film with core-shell architecture for the high-performance flexible supercapacitor

Polypyrrole/graphene Oxide Deposited on Two Metalized Surfaces of Porous Polypropylene Films As All-in-one Flexible Supercapacitors

Self-assembled high polypyrrole loading flexible paper-based electrodes for high-performance supercapacitors