Abstract:Bolted spherical joints are widely used to form space steel structures. The stiffness and load capacity of the structures are affected by the looseness of bolted spherical joint connections in the structures. The looseness of the connections, which can be caused by fabrication error, low modeling accuracy, and "false twist" in the installation process, may negatively impact the load capacity of the structure and even lead to severe accidents. Furthermore, it is difficult to detect bolted spherical joint connection looseness from the outside since the bolts connect spheres with rods together from the inside. Active sensing methods are proposed in this paper to monitor the tightness status of the bolted spherical connection using piezoceramic transducers. A triangle-on-triangle offset grid composed of bolted spherical joints and steel tube bars was fabricated as the specimen and was used to validate the active sensing methods. Lead Zirconate Titanate (PZT) patches were used as sensors and actuators to monitor the bolted spherical joint tightness status. One PZT patch mounted on the central bolted sphere at the upper chord was used as an actuator to generate a stress wave. Another PZT patch mounted on the bar was used as a sensor to detect the propagated waves through the bolted spherical connection. The looseness of the connection can impact the energy of the stress wave propagated through the connection. The wavelet packet analysis and time reversal (TR) method were used to quantify the energy of the transmitted signal between the PZT patches by which the tightness status of the connection can be detected. In order to verify the effectiveness, repeatability, and consistency of the proposed methods, the experiments were repeated six times in different bolted spherical connection positions. The experimental results showed that the wavelet packet analysis and TR method are effective in detecting the tightness status of the connections. The proposed active monitoring method using PZT transducers can monitor the tightness levels of bolted spherical joint connections efficiently and shows its potential to guarantee the safety of space steel structures in construction and service.

Continuous Monitoring of Tightening Condition of Single-Lap Bolted Composite Joints Using Intrinsic Mode Functions of Acoustic Emission Signals: a Proof-of-concept Study

Contact Acoustic Nonlinearity (Can)-Based Continuous Monitoring of Bolt Loosening: Hybrid Use of High-Order Harmonics and Spectral Sidebands

Continuous Monitoring of Residual Torque of Loose Bolt in a Bolted Joint

Lamb Wave-Based Structural Health Monitoring On Composite Bolted Joints Under Tensile Load

Analysis of friction‐related acoustic emission in bolted joint structures

Integrated acoustic‐vibration frequency‐modulation technology to detect the contact nonlinear features of mechanical structure

Experimental investigation on acoustic emission in fretting friction and wear of bolted joints

Health Monitoring of Aerospace Bolted Lap Joints Using Nonlinear Ultrasonic Spectroscopy: Theory and Experiments

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Monitoring of corrosion-induced damage to bolted joints using an active sensing method with piezoceramic transducers

Multi-Bolt Loosening Monitoring Using an Integrated Vibro-Acoustic Modulation Technique

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Entire loosening stage monitoring of bolted joints via nonlinear electro-mechanical impedance spectroscopy

Investigation on mechanical property and failure mechanism of the carbon/glass hybrid laminate bolted joints using acoustic emission

Interface behaviors of elastic-plastic waves and its impact on uncertainties in vibro-acoustic modulation (VAM) for structural health monitoring (SHM) of bolt loosening

Real time bolt preload monitoring using piezoceramic transducers and time reversal technique—a numerical study with experimental verification

Influence Factors of Fretting Wear of Bolted Joints Structure Based on Acoustic Emission

Acoustic Emission Based Monitoring of Fatigue Damage in CFRP-CFRP Adhesive Bonded Joints

Bolt tightness monitoring using multiple reconstructed narrowband lamb waves combined with piezoelectric ultrasonic transducer

Health Monitoring of Bolted Spherical Joint Connection Based on Active Sensing Technique Using Piezoceramic Transducers