Abstract:Pin connections are one of the most important connecting forms and they have been widely used in engineering fields. In its service, pin connections are subject to wear, and it will be beneficial if the health condition of pin connections can be monitored in real time. In this paper, an acoustic emission (AE)-based method was developed to monitor wear degree of low rotational speed pin connections in real time in a nondestructive way. Most pin connections are operated at low rotational speed. To facilitate the research, an experimental apparatus to accelerate the wear test of low rotational speed pin connections was designed and fabricated. The piezoceramic AE sensor was mounted on the test apparatus in a nondestructive way, and it was capable of real-time monitoring. Accelerated wear tests of low rotational speed pin connections were conducted. To verify the results of the AE technique, a VHX-600E digital (from Keyence, Osaka, Japan) microscope was applied to observe the micrographs of the tested pins. The experimental results show that AE activity existed throughout the entire wear process, and it was the most prominent in the serious wear phase. The wear degree of the pin connections can be reflected qualitatively by the signal strength and the accumulative signal strength of the AE signals. In addition, two different wear forms can be distinguished by comparing the signal strength values of all specimens. Micrographs of all specimens confirm these results, and determine that the two wear forms include adhesive wear and abrasive wear. Furthermore, AE results demonstrated that adhesive wear is the main mode of wear for the low rotational speed pin connections, and the signal strength of the adhesive wear is around 190 times larger than that of abrasive wear. This feasibility study demonstrated that the developed acoustic emission technique can be utilized in the wear monitoring of pin connections in real time in a nondestructive way.

Influence Factors of Fretting Wear of Bolted Joints Structure Based on Acoustic Emission

Experimental investigation on acoustic emission in fretting friction and wear of bolted joints

Analysis of friction‐related acoustic emission in bolted joint structures

Quantitative Relationship Between Sliding-Generated Acoustic Emission and Friction Conditions at Bolted Joint Interfaces

Experimental Investigation of Correlation Between Attrition Wear and Features of Acoustic Emission Signals in Single-Grit Grinding

Detection of bolt head corrosion under external vibration using a novel entropy-enhanced acoustic emission method

Ultrasonic testing of axial stress of high strength bolts for bridges

Investigation on mechanical property and failure mechanism of the carbon/glass hybrid laminate bolted joints using acoustic emission

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

Application of Ultrasonic Stress Measurement in the Evaluation of Bolt Fastening Force

The relationship between acoustic emissions and wear particles for repeated dry rubbing

Feasibility Study of Real-Time Monitoring of Pin Connection Wear Using Acoustic Emission

Fatigue damage evolution model of stainless-steel-cruciform-joint with weld defect using AE signal

Integrated acoustic‐vibration frequency‐modulation technology to detect the contact nonlinear features of mechanical structure

Study on the Friction Behavior and Abnormal Conditions of Non-contact Mechanical Seal Based on Acoustic Emission

Axial stress measurement for tightened bolt based on the effect of stress on ultrasonic wave attenuation

Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles

Characteristic Evaluation on Bolt Stress by Ultrasonic Nondestructive Methods

Correlation Between Acoustic Emission Detection and Microstructural Characterization for Damage Evolution

The Influence of Friction Coefficient on Bolt Looseness under Low Frequency Vibration Via Finite Element Analysis