Abstract:Flexure mechanisms with decoupled characteristics have been widely utilized in precision positioning applications. However, these mechanisms suffer from either slow response or low load capability. Furthermore, asymmetric design always leads to thermal error. In order to solve these issues, a novel 2-DOF decoupled mechanism is developed by monolithically manufacturing sets of statically indeterminate symmetric (SIS) flexure structures in parallel. Symmetric design helps to eliminate the thermal error and Finite Element Analysis (FEA) results show that the maximum coupling ratio between X and Y axes is below 0.25% when a maximum pretension force of 200 N is applied. By ignoring the mass effect, all the SIS flexure structures are simplified to “spring-damper” components, from which the static and dynamics model are derived. The relation between the first resonant frequency of the mechanism and the load is investigated by incorporating the load mass into the proposed dynamics model. Analytical results show that even with a load of 0.5 kg, the first resonant frequency is still higher than 300 Hz, indicating a high load capability. The mechanism’s static and dynamic performances are experimentally examined. The linear stiffnesses of the mechanism at the working platform and at the driving point are measured to be 3.563 0 N·μm−1 and 3.362 1 N·μm−1, respectively. The corresponding estimation values from analytical models are 3.405 7 N·μm−1 and 3.381 7 N·μm−1, which correspond to estimation errors of −4.41% and 0.6%, respectively. With an additional load of 0.16 kg, the measured and estimated first resonant frequencies are 362 Hz and 365 Hz, respectively. The estimation error is only 0.55%. The analytical and experimental results show that the developed mechanism has good performances in both decoupling ability and load capability; its static and dynamic performance can be precisely estimated from corresponding analytical models. The proposed mechanism has wide potentials in precision positioning applications.

Design and Stiffness Analysis of a Class of 2-Dof Tendon Driven Parallel Kinematics Mechanism

Kinematics Analysis of a Novel 2r1t Parallel Mechanism

Design and Analysis of a Novel 2T2R Parallel Mechanism with the Closed-loop Limbs

Stiffness Analysis of a 3-DOF Parallel Mechanism for Engineering Special Machining

Kinetostatic and Dynamic Analyses of Planar Compliant Mechanisms Via a Two-Port Dynamic Stiffness Model

Stiffness modeling of a 2-DoF over-constrained planar parallel mechanism

Design and analysis of a class of two-limb non-parasitic 2T1R parallel mechanism with decoupled motion and symbolic forward position solution - influence of optimal arrangement of limbs onto the kinematics, dynamics and stiffness

Stiffness Analysis of A 2-Dof Over-Constrained Rpm with an Articulated Traveling Platform

Dynamics analysis of a new 2T1R parallel mechanism with symbolic position solutions and partially motion decoupled

Kinematic and Static Analysis of A Planar Compliant Tensegrity-Like Parallel Mechanism

Dynamic Model of a 6-DOF Parallel Mechanism with Hooke's Joints at Both Chain Ends

Elasto-dynamic analysis of a novel 2-DoF rotational parallel mechanism with an articulated travelling platform

Design And Kinematic Analysis Of A 2-Dof Spatial Parallel Mechanism With Flexible Orientation Capability

Kinematics Analysis of a New Spatial 3-DOF Parallel Mechanism

Design of a 2T1r-Type Parallel Mechanism: Performance Analysis and Size Optimization

Design and Dynamic Modeling of a 2-DOF Decoupled Flexure-Based Mechanism

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Stiffness Modeling of Parallel Mechanisms at Limb and Joint/Link Levels

Stiffness Modeling and Optimization Analysis of a Novel 6-DOF Collaborative Parallel Manipulator.

Stiffness analysis and experiment of a novel 5-DoF parallel kinematic machine considering gravitational effects

A Comparative Study on 2-DOF Variable Stiffness Mechanisms