Abstract:Three-degree-of-freedom parallel mechanism has the characteristics of simple structure， low cost， convenient motion control， high stiffness and large bearing capacity， and has been widely used in industrial production and other equipment， among which 2T1R parallel mechanism with mixed movement and rotation has higher research value. In order to develop and popularize the application of 2T1R parallel mechanism （PM）， a spatial 2T1R PM with zero coupling degree and partially decoupled motion was proposed. Firstly， the forward and inverse solutions of the PM were analyzed， and the relation matrix between the velocity of each component and the input velocity was solved. Then， the dynamic models of each sub kinematic chain （SKC） were established using the order single open chain method based on the virtual work principle， according to the order of the topological structure decomposition of the mechanism， and the inverse dynamic model of the entire mechanism was obtained. Finally， an example study was carried out on the established dynamic model， and the driving force of the PM and the support and reaction force at the connection of two SKC were obtained， which were compared with the results of ADAMS virtual simulation. The results show that the 2T1R parallel mechanism has the advantage of partial motion decoupling， and the effectiveness and correctness of the established reverse dynamics model are verified by simulation comparison， which lays a foundation for its structural design and prototype development.

Dynamics analysis of a new 2T1R parallel mechanism with symbolic position solutions and partially motion decoupled

Three 2-DOF 1T1R and One 3-DOF 2T1R Full-Hinged Novel Parallel Mechanisms with Zero Coupling Degree and Motion Decoupling: Design and Analysis

Design and analysis of a class of two-limb non-parasitic 2T1R parallel mechanism with decoupled motion and symbolic forward position solution - influence of optimal arrangement of limbs onto the kinematics, dynamics and stiffness

A Translational Three-Degrees-of-Freedom Parallel Mechanism with Partial Motion Decoupling and Analytic Direct Kinematics

A new 3-DOF 2T1R parallel mechanism: Topology design and kinematics

Design and Motion Principle Analysis of new parallel mechanisms with fewer active inputs than the degrees of freedom

Type Synthesis of Fully Decoupled Three Translational Parallel Mechanism with Closed-Loop Units and High Stiffness

Motion Characteristics Analysis of a Novel 2R1T 3-UPU Parallel Mechanism

Design and Direct Position Analysis of a New 3T1R Parallel Manipulator with Low Coupling Degree

Topological Analysis of a Partially Decoupled 3T1R Parallel Mechanism with Zero Coupling Degree

Analysis of rigid multibody dynamics for a novel 4-DOF parallel mechanism

Kinematics and Inverse Dynamics Analysis for a Novel 3-PUU Parallel Mechanism.

Type Synthesis of 2T1R Planar Parallel Mechanisms and Their Moduling Development Applications

Type synthesis of a new parallel mechanism with complete separation of constraints and drives

Kinematics and performance analysis of redundantly-actuated parallel mechanism 2URR-2RRU

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Kinematics Analysis of a Novel 2r1t Parallel Mechanism

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

Kinematic Design of a Translational Parallel Mechanism Based on Sub-Kinematic Chain Determined Workspace Superposition

Design of a 2T1r-Type Parallel Mechanism: Performance Analysis and Size Optimization

Design and Kinematic Analysis of a 3-Translational-dof Spatial Parallel Mechanism Based on Polyhedra