Abstract:This paper deals with the kinematic optimization of a five degrees-of-freedom (DoFs) spatial parallel mechanism with three kinematic chains. Inspired by the structure of the icosahedron, the base of the discussed mechanism has been designed into a compact and light-weight frame. Due to the potential advantages, this mechanism is used as a movable plug-in module in a multi-axis machine center to process large-scale parts with rotary contour surfaces. To derive its optimal parameters, kinematic optimization based on the motion/force transmissibility is carried out. The parameter design space (PDS) is generated first. Then, the performance evaluation index (i.e., local transmission index (LTI)) is derived sequentially. On this basis, the good transmission positioning workspace (GTPW) for a given orientation is defined by constraining the value of LTI with a certain metric. Thereafter, the atlases of the GTPW and the optimal region satisfying the workspace constraint are derived in the PDS. Within this region, a set of optimal parameters without dimension are selected. Consequently, the cuboid workspaces within GTPWs are identified in detail. By using the ratio between required workspace in application and the derived cuboid workspaces, optimal geometric parameters with dimension are derived. Workspace analysis results show that, for an arbitrary orientation between the vertical and horizontal directions, there is always a cuboid workspace within GTPW larger than required workspace. In addition, the orientational capability of the mechanism can reach more than 90 deg, and the flexible 2DoFs rotations can also be realized. The work in this paper is very helpful to the development of a mobile machining module.

Design and Kinematic Analysis of a 3-Translational-dof Spatial Parallel Mechanism Based on Polyhedra

Design of a Spatial Translation Mechanism by Optimizing Spatial Ground Structures and Its Kinematic Analysis

Design principles and kinematic analysis of a novel spherical 2-degree-of-freedom (DOF) parallel mechanism

Kinematics Analysis of a New Spatial 3-DOF Parallel Mechanism

Design And Kinematic Analysis Of A 2-Dof Spatial Parallel Mechanism With Flexible Orientation Capability

Kinematic Analysis and Dimensional Synthesis of a Novel 3-DOF Parallel Mechanism

Motion Characteristics Analysis of a Novel Spherical Two-degree-of-freedom Parallel Mechanism

Design and Analyses of a Novel 3-DOF Parallel Mechanism

Kinematics Analysis of a Novel Over-Constrained Three Degree-of-freedom Spatial Parallel Manipulator

Development of a Novel 3-Dof Purely Translational Parallel Mechanism

A Translational Three-Degrees-of-Freedom Parallel Mechanism with Partial Motion Decoupling and Analytic Direct Kinematics

Design and Analysis of a Novel 2T2R Parallel Mechanism with the Closed-loop Limbs

Design and Analysis of Partially Decoupled Translational Parallel Mechanisms with Single-Loop Structures

Kinematic Design of a Translational Parallel Mechanism Based on Sub-Kinematic Chain Determined Workspace Superposition

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

Kinematics Analysis of a Novel 2r1t Parallel Mechanism

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

Design and Analysis of 3R2T and 3R3T Parallel Mechanisms With High Rotational Capability

Design of a Three-Chain 6-DOF Symmetrical Parallel Mechanism and Solutions of Its Forward and Inverse Kinematics

Kinematic Optimization of a Five Degrees-of-Freedom Spatial Parallel Mechanism With Large Orientational Workspace

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability