Abstract:A feasibility study was performed to fabricate ITER In-Vessel components by one of the metal additive manufacturing methods, Electron Beam Melting® (EBM®). Solid specimens of SS316L with 99.8% relative density were prepared from gas atomized precursor powder granules. After the EBM® process the phase remains as austenite and the composition has practically not been changed. The RCC-MR code used for nuclear pressure vessels provides guidelines for this study and tensile tests and Charpy-V tests were carried out at 22 °C (RT) and 250 °C (ET). This work provides the first set of mechanical and microstructure data of EBM® SS316L for nuclear fusion applications. The mechanical testing shows that the yield strength, ductility and toughness are well above the acceptance criteria and only the ultimate tensile strength of EBM® SS316L is below the RCC-MR code. Microstructure characterizations reveal the presence of hierarchical structures consisting of solidified melt pools, columnar grains and irregular shaped sub-grains. Lots of precipitates enriched in Cr and Mo are observed at columnar grain boundaries while no sign of element segregation is shown at the sub-grain boundaries. Such a unique microstructure forms during a non-equilibrium process, comprising rapid solidification and a gradient ‘annealing’ process due to anisotropic thermal flow of accumulated heat inside the powder granule matrix. Relations between process parameters, specimen geometry (total building time) and sub-grain structure are discussed. Defects are formed mainly due to the large layer thickness (100 μm) which generates insufficient bonding between a few of the adjacently formed melt pools during the process. Further studies should focus on adjusting layer thickness to improve the strength of EBM® SS316L and optimizing total building time.

Extrusion Process of 316LN L-shape Stainless Steel and Manufacture Process of ITER Side Correction Coil Box

Research on Extrusion Process of 316LN Stainless Rectangle Thick-Wall Tube Used in ITER Top and Bottom Correction Coils

Manufacturing and testing of ITER FW CuCrZr/316L(N)-IG explosive Bi-metallic plates

Study on the Microstructure and Properties Evolution of CuCrZr/316LN-IG Explosion Bonding for ITER First Wall Components

Extrusion Process of 304L H-shaped Stainless Steel Used in Passive Residual Heat Removal Heat Exchanger

Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications

Effect of Cold Working and Aging Treatment on Mechanical Performance of SS316LN Tube

Creep-fatigue Properties and Deformation Mechanism of 316L Steel Fabricated by Laser Powder Bed Fusion (PBF-LB/M)

Mechanical Test on the Iter Cc and Feeder Jacket

Mechanical test on the ITER TF jacket

Hot Radial Upset-Extruding Process for Tube Structure with a Nozzle of 316LN Stainless Steel

Preparation of the Manufacture of the ITER Correction Coils

Manufacture and Behaviors of Superconducting Busbar Joint for ITER Correction Coil Feeder

Numerical simulation and experiment study on hot extrusion process of 18Ni (250) maraging steel large fan shaft for aero-engines

Mechanical Properties of ITER CICC Jacket in China

Process parameter optimization and mechanical properties for additively manufactured stainless steel 316L parts by selective electron beam melting

Mechanical Properties Evaluation of ReBCO CICC Jacket Based on Super-Austenitic Stainless Steel for CFETR High-Field Magnet

Exploring structural origins responsible for the exceptional mechanical property of additively manufactured 316L stainless steel <i>via</i> <i>in</i>-<i>situ</i> and comparative investigations

Conceptual Design and Finite Element Analysis of STR-3 Feeder for ITER

Finite Element Analysis Of Piercing Process Of Piercing Extrusion For Titanium Alloy Solid Ingots

Ductile Fracture Prediction of 316LN Stainless Steel In Hot Deformation Process