Abstract:Al-Ti-B intermediate alloys are widely used as grain refiners in aluminum alloys owing to the presence of Al3Ti and TiB2 phases. However, the existence of Zr in aluminum alloy melts often results in coarse grain size, leading to Al-Ti-B failure called Zr poisoning. There are three kinds of poisoning mechanisms related to TiB2, Al3Ti, and a combination of TiB2 and Al3Ti for Zr. First, Zr forms ZrB2 or Ti2Zr with TiB2 in Al-Ti-B to reduce the nucleation ability. Second, Zr existing in the aluminum melt with a high melting point Al3Zr then attracts Ti to reduce the dispersion of Ti as a growth inhibitor. Third, Zr reacts with Al3Ti on TiB2 surface to form Al3Zr, thereby increasing the degree of mismatch with Al and diminishing the refiner’s ability as a nucleation substrate. To gain a better understanding of the mechanism of Zr poisoning, the first principle was used in this study to calculate the adhesion works (ZrB2//Al3Ti), (Ti2Zr//Al3Ti), (Al3Zr//Al3Ti), (Al3Ti//Al), (TiB2//Al3Zr), and (Al3Zr//Al), as well as the surface energy of Al3Zr and adsorption energies of Al to Al3Ti or Al3Zr. The results demonstrated that Zr poisoning originated from the second guess. Zr element exiting in aluminum melt led to the formation of an Al3Zr (001) surface. The interfacial adhesion work of Al3Zr (001)//Al3Ti (001) was not weaker than that of TiB2//Al3Ti. As a result, Al3Zr first combined with Al3Ti to significantly decline the adsorption of Al3Ti (001) on Al, losing its role as a nucleating agent and grain coarsening. Overall, to prevent failure of the grain refiner in Zr containing aluminum melt, the adhesion work interface between the generated phase of the grain refiner and Al3Zr must remain lower to avoid the combination of the generated phase of grain refiner with Al3Zr. In sum, these findings look promising for evaluating future effects of grain refinement in Zr containing aluminum melt.

In Situ Observation of the Zr Poisoning Effect in Al Alloys Inoculated by Al-Ti-B

An in Situ Investigation of the Solute Suppressed Nucleation Zone in an Al-15 Wt% Cu Alloy Inoculated by Al-Ti-B

Insights into Poisoning Mechanism of Zr by First Principle Calculation on Adhesion Work and Adsorption Energy between TiB2, Al3Ti, and Al3Zr

In Situ Investigation of Si-Poisoning Effect in Al–Cu–Si Alloys Inoculated by Al–5Ti–1B

In Situ Investigation of the Solidification of Al-20 Wt.% Zn Alloys Inoculated by Al-5Ti-1B

Effect of Trace Zr on Microstructure and Hardness of Al-Zn-Mg-Cu Alloy Prepared under Supergravity

The Growth Restriction Effect of Ticn Nanoparticles on Al-Zr Alloys: an Integrated Study by in Situ X-Radiography and Numerical Modeling

Self-sacrificial Hydrogen Channel Enhances the Poisoning Resistance of ZrCo-based Alloy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

In Situ Investigation of the Heterogeneous Nucleation Sequence in Al-15 Weight Percent Cu Alloy Inoculated by Al-Ti-B

The Growth Restriction Effect of TiCN Nanoparticles on Al-Cu-Zr Alloys Via Ultrasonic Treatment.

Effect of Zr addition on the microstructure evolution and mechanical properties of extruded Al-Cu-Li-Mn alloys

Solidification of Mg–Zn–Zr Alloys: Grain Growth Restriction, Dendrite Coherency and Grain Size

In Situ Observation of the Specific Nucleation Behavior of Grains During the Solidification of Al Alloy Inoculated by Sc

Mechanism of Zr Poisoning Al-5Ti-B Grain Refiners Based on the First-Principles Calculation

Influence of Zr addition on the morphology of primary MgZn 2 in the solidification microstructure of Zn-6Al-3Mg alloy

Effect of Zr on microstructure and hot cracking susceptibility of ZGH451 superalloy fabricated by direct energy deposition

Inoculating solid-state homogeneous precipitation by impurity atoms through a spinodal decomposition like pathway

Effect of Variation in Zr Content on Microstructure and High-Temperature Tensile Properties of a Γ-Tial Alloy

Effect of Zr on Microstructure and Mechanical Properties of Binary TiAl Alloys

Effect of Zirconium Content on the Microstructure and Corrosion Behavior of As-Cast Ti-Al-Nb-Zr-Mo Alloy