Abstract:Al-Ti-B intermediate alloys are widely used as grain refiners in aluminum alloys owing to the presence of Al3Ti and TiB2 phases. However, the existence of Zr in aluminum alloy melts often results in coarse grain size, leading to Al-Ti-B failure called Zr poisoning. There are three kinds of poisoning mechanisms related to TiB2, Al3Ti, and a combination of TiB2 and Al3Ti for Zr. First, Zr forms ZrB2 or Ti2Zr with TiB2 in Al-Ti-B to reduce the nucleation ability. Second, Zr existing in the aluminum melt with a high melting point Al3Zr then attracts Ti to reduce the dispersion of Ti as a growth inhibitor. Third, Zr reacts with Al3Ti on TiB2 surface to form Al3Zr, thereby increasing the degree of mismatch with Al and diminishing the refiner’s ability as a nucleation substrate. To gain a better understanding of the mechanism of Zr poisoning, the first principle was used in this study to calculate the adhesion works (ZrB2//Al3Ti), (Ti2Zr//Al3Ti), (Al3Zr//Al3Ti), (Al3Ti//Al), (TiB2//Al3Zr), and (Al3Zr//Al), as well as the surface energy of Al3Zr and adsorption energies of Al to Al3Ti or Al3Zr. The results demonstrated that Zr poisoning originated from the second guess. Zr element exiting in aluminum melt led to the formation of an Al3Zr (001) surface. The interfacial adhesion work of Al3Zr (001)//Al3Ti (001) was not weaker than that of TiB2//Al3Ti. As a result, Al3Zr first combined with Al3Ti to significantly decline the adsorption of Al3Ti (001) on Al, losing its role as a nucleating agent and grain coarsening. Overall, to prevent failure of the grain refiner in Zr containing aluminum melt, the adhesion work interface between the generated phase of the grain refiner and Al3Zr must remain lower to avoid the combination of the generated phase of grain refiner with Al3Zr. In sum, these findings look promising for evaluating future effects of grain refinement in Zr containing aluminum melt.

Mechanism of Zr Poisoning Al-5Ti-B Grain Refiners Based on the First-Principles Calculation

Insights into Poisoning Mechanism of Zr by First Principle Calculation on Adhesion Work and Adsorption Energy between TiB2, Al3Ti, and Al3Zr

In Situ Observation of the Zr Poisoning Effect in Al Alloys Inoculated by Al-Ti-B

Mechanism of Sc Poisoning of Al-5Ti-1B Grain Refiner

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Synergistic effect of Zr addition and grain refinement on corrosion resistance and pitting corrosion behavior of single α-phase Ti-Zr-based alloys

Effect of Zr on Undissolved Phases and Carbide Precipitation in Ti Microalloyed Low-Carbon Steel

Revealing the mechanism of grain refinement and anti Si-poisoning induced by (Nb, Ti)B2 with a sandwich-like structure

Grain Refinement Mechanism of Al-5Ti-1B Master Alloy by Ab Initio Calculations

Effect of Zr on Microstructure and Mechanical Properties of Binary TiAl Alloys

Influence of Element Substitutions on Poisoning Behavior of ZrV2 Alloy: Theoretical and Experimental Investigations

Study on corrosion and wear behavior mechanism of Zr-based bulk amorphous

The mechanism of anti-disproportionation for Ti-doped ZrCo alloys

Intermetallic Growth and Interfacial Properties of the Grain Refiners in Al Alloys

Understanding alloying behaviors of Sc, Ni and Zn additions on Al/TiB2 interfaces based on interfacial characteristics and solute properties

Synergistic Effect of La and TiB2 Particles on Grain Refinement in Aluminum Alloy

Quantities of grains of aluminum and those of TiB2 and Al3Ti particles added in the grain-refining processes

Growth mechanism of Al2O3 on surface of ZrO2 inclusions: experimental and first principles investigation

Nitrate Reduction Reaction on Zr-Doped TiO2 (101) Surfaces Investigated by First-Principles Calculations

An experimental study of the effect of Ag, Cu, Li, Mg, Ni, Ti, Sc, Zr on grain refining in binary and multicomponent Al-based alloys

Fabrication of Al–Ti–B Grain Refiner Using Machining Ti Chips, Reaction Mechanisms and Grain Refinement Performance in Pure Al