Abstract:The application of quaternary ammonium-based moisture-swing adsorbent provides an effective strategy for direct air capture (DAC) with low energy consumption of regeneration. This study optimized a fabrication method of shaped adsorbents and a hydrophobicity regulation method by doping polyvinylidene difluoride (PVDF). Characterization of the shaped adsorbents showed a desirable surface area and pore structure. Experiments of CO2 adsorption revealed that the adsorbents exhibited excellent CO2 adsorption capacity (∼0.90 mmol/g) in relative humidity (RH) range of 20 ∼ 85% was enhanced by 160% of that before doping. Meanwhile, a high CO2 adsorption rate (with a half-time of 3.6 ∼ 3.82 min) at 84.7% RH was displayed. The optimal doping ratio of PVDF was found to be 25% (QAR-25% PVDF). It can effectively release CO2 with 100% RH, and heat assistance (<60 °C) can be considered for optimal results. QAR-25% PVDF exhibited a cyclic capacity of 0.90 mmol/g after ten cycles, demonstrating its stability and reusability. DFT and microscopic characterization revealed the key role of C-F bond in promoting the hydrophobicity of adsorbents. Meanwhile, the isotherm of H2O/CO2 adsorption illustrated that doping PVDF could effectively reduce the humidity sensitivity of shaped adsorbents and improve CO2 adsorption rate significantly. Among DAC adsorbents reported previously, the adsorbents developed in this study showed higher functional group efficiency (η QA = 0.89) at high humidity conditions. The fabrication method of shaped adsorbent provides a viable strategy for its large-scale deployment. Doping hydrophobic carriers into the adsorbent material is a simple yet effective way to reduce its humidity sensitivity, enabling it to better adapt to complex environmental conditions.

Quaternized Chitosan/PVA Aerogels for Reversible CO2 Capture from Ambient Air

Porosity and Hydrophilicity Modulated Quaternary Ammonium-Based Sorbents for CO2 Capture

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Moisture-swing sorption for carbon dioxide capture from ambient air: a thermodynamic analysis.

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Designing and Screening of Moisture‐Swing Porous Adsorbents for Rapid CO2 Capture from Air

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Moisture Swing Ion-Exchange Resin-PO4 Sorbent for Reversible CO2 Capture from Ambient Air

Quaternized Plant-Based Porous Biochar for Direct Air Capture of CO 2 by Moisture-Swing Adsorption

Facile and efficient chitosan-based hygroscopic aerogel for air dehumidification

Unidirectional Ice-Templating for Aerogel Adsorbents: Excellent Pore Structure and High CO2 Capture Performance for Direct Air Capture

Preparation and Kinetics of a Heterogeneous Sorbent for CO 2 Capture from the Atmosphere

Aminated Microcrystalline Cellulose Aerogel for Efficient CO2 Capture

Amino-modified biochar-silica hybrid aerogels with ordered pore structure templated by cellulose nanocrystals for highly efficient and selective CO 2 capture

Novel Vermiculite/tannic Acid Composite Aerogels with Outstanding CO2 Storage Via Enhanced Gas Hydrate Formation

Facile synthesis and biomimetic amine-functionalization of chitosan foam for CO2 capture

A Soluble and Recyclable Polymeric Adsorbent of Intrinsic Microporosity for CO2 Capture

Facile Synthesis of Structured Adsorbent with Enhanced Hydrophobicity and Low Energy Consumption for CO2 Capture from the Air

Chitosan modified multi-walled carbon nanotubes and arginine aerogel for enhanced carbon capture

Humidity sensitivity reducing of moisture swing adsorbents by hydrophobic carrier doping for CO2 direct air capture

Study on the adsorption rate of anion exchange absorbents for capturing carbon dioxide in ambient air