Abstract:The rapid cleanup of endogenous CO2 has become a necessity in environmental control and life support systems (ECLSSs), to ensure crew safety and long-term task execution. The extensively used non-regenerable LiOH and soda lime adsorbents, although exhibit high CO2 storage capacities and fast kinetics, can hardly fulfill the demands of reduced launch weight and storage volume in the space-and load-limited ECLSSs. New CO2 adsorbents with desirable attributes including high CO2 uptakes, good selectivity, facile regeneration, fast adsorption and desorption kinetics, and good multicycle stability are urgently needed. We developed amine-functionalized adsorbents by loading tetraethylenepentamine (TEPA) on mesoporous supports of activated carbon (AC), aluminum oxide (AO) and silica gel (SG). The adsorbents were characterized by N-2 adsorption-desorption, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscope (SEM) to study their microstructural properties. CO2 adsorption capacities and kinetic performance of the adsorbents with different supports and various amine loadings (10-50 wt%) were evaluated in 2%CO2 at 20 degrees C. The effects of support and amine loading on the structure-performance relationships of the adsorbents were demonstrated. The TEPA-SG-20 adsorbent (20 wt% TEPA loaded on silica gel support) exhibits the highest CO2 adsorption capacity of 1.90 mmol CO2/g and the maximum amine efficiency of 0.48 mmol CO2/mmol N. TEPA-SG-20 also exhibits fast CO2 adsorption kinetics, and the Avrami fractional order kinetic model provides a satisfactory correlation of the experimental CO2 uptakes. Furthermore, the TEPA-SG-20 adsorbent can be efficiently regenerated at 110 degrees C with a great regeneration efficacy of 97%. The desired adsorbent also exhibits good working stability with a low loss-in-capacity of 4.32% in 10 consecutive cycles. The good CO2 adsorption performance of TEPA-SG-20 is associated with the excellent microstructural properties such as high surface area, great pore volume and uniform dispersion of amine species. Overall, the desired TEPA-SG-20 adsorbent shows promise for low concentration CO2 removal in ECLSSs. (c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.

Study on the adsorption rate of anion exchange absorbents for capturing carbon dioxide in ambient air

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Designing and Screening of Moisture‐Swing Porous Adsorbents for Rapid CO2 Capture from Air

An Immobilized Amine with Improved Cyclic Performance Prepared from Carboxyl Modified Mesoporous Silica for CO2 Capture

Improvement of Adsorbent Materials for CO 2 Capture by Amine Functionalized Mesoporous Silica with Worm-Hole Framework Structure

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

CO2 Absorption over Ion Exchange Resins: the Effect of Amine Functional Groups and Microporous Structures

Experimental and Kinetics Investigations of Low-Concentration CO2 Adsorption on Several Amine-Functionalized Adsorbents

Co2 Adsorption on Porous Materials: Experimental and Simulation Study

Application of Polyethylenimine‐impregnated Solid Adsorbents for Direct Capture of Low‐concentration CO2

Development of composite amine functionalized polyester microspheres for efficient CO2 capture

Direct Capture of Low-Concentration CO2 on Mesoporous Carbon-Supported Solid Amine Adsorbents at Ambient Temperature

Amino Acid Modified Macroreticular Anion Exchange Resins for Co2 Adsorption

Reconsideration about the competitive adsorption of H2O and CO2 on carbon surfaces: The influence of oxygen functional groups

Robust Enhancement of Direct Air Capture of CO2 Efficiency Using Micro-Sized Anion Exchange Resin Particles

Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas

A Soluble and Recyclable Polymeric Adsorbent of Intrinsic Microporosity for CO2 Capture

High Efficiency Mixed Amine Adsorbents for Directly Capturing Carbon Dioxide from Air

Development and characterization of amine-functionalized hyper-cross-linked resin for CO2 capture

Comprehensive Study of CO2 Capture Performance under a Wide Temperature Range Using Polyethyleneimine-Modified Adsorbents