Abstract:The dynamic performance of a nozzle-flapper servo valve can be affected by several factors such as the disturbance of the input signal, the motion of the armature assembly and the oscillation of the jet force. As the part of vibrating at high frequency, the armature assembly plays a vital role during the operation of the servo valve. In order to accurately predict the transient response of the armature assembly during the vibration, a mathematical model of armature assembly is established based on the distributed parameters method (DPM) and Hamilton principle. The new mathematical model is composed of three main parts, the modal eigenfunction, modal mechanical response expressions of the spring tube and the motion equation of the other armature assembly. After programing, the purpose of using the DPM to predict the dynamic response of different positions located on the armature assembly is achieved. For verifying the validity of the mathematical model, the finite element method (FEM) and classic model (CM) of armature assembly are applicated by commercial software under the same condition. The comparison results prove that the DPM can effectively predict the axial and tangential deflection of the armature assembly different positions which the CM can't duing to its over-simplification. A certain error is generated when predicting the axial deformation at different heights by DPM, which is caused by an approximate method to simulate the torsion of the spring tube. The comparison results of the spring tube deflection at different vibration frequencies shows that the adaptability of DPM is significantly higher than the classic model, which verify the model is more adaptable for predicting the dynamic response of the armature assembly.

Nonlinear dynamic and effect parameters analysis for extension pneumatic muscle

Modeling and Enhancement of Mckibben Pneumatic Muscle Actuators

Modelling and Simulation of Joint Actuated by Pneumatic Muscles

Research on PMA Properties and Humanoid Lower Limb Application.

Modeling of a servo platform driven by pneumatic artificial muscles

Levelling Control of an Electro-pneumatic Stabilized Platform Driven by Pneumatic Muscles

Model-Based Nonlinear Control of the Dielectric Elastomer Actuator with High Robustness and Precision

Identification of Characteristic Parameters and Structure Parameters in Pneumatic Servo Control

Parameter Identification and Model-Based Nonlinear Robust Control of Fluidic Soft Bending Actuators

Characterization and Nonlinear Models of Bending Extensile/contractile Pneumatic Artificial Muscles

An experiments based modeling method for Pneumatic Artificial Muscle.

Empirical modeling of dynamic behaviors of pneumatic artificial muscle actuators

One Nonlinear PID Control to Improve the Control Performance of a Manipulator Actuated by a Pneumatic Muscle Actuator

Mathematical modeling of an armature assembly in pilot stage of a hydraulic servo valve based on distributed parameters

A New Approach to Modeling and Controlling a Pneumatic Muscle Actuator-Driven Setup Using Back Propagation Neural Networks.

Nonlinear Modeling for Soft Pneumatic Actuators via Data-Driven Parameter Estimation

A Precise Modeling Method for PMSM Servo System of Spacecraft

Modeling and Compensation of Asymmetric Hysteresis for Pneumatic Artificial Muscles with a Modified Generalized Prandtl–Ishlinskii Model

Dynamics Investigation on Bidirectional Active Flexible Bending Joints

Dynamic Control of Pneumatic Muscle Actuators

A Dynamic Modeling Method for Soft Pneumatic Robotic Arms Considering Both Geometric Nonlinearity and Visco-Hyperelasticity