Abstract:Continuous-fiber-reinforced composite lattice structures (CFRCLSs) have garnered attention due to their lightweight and high-strength characteristics. Over the past two decades, many different topological structures including triangular, square, hexagonal, and circular units were investigated, and the basic mechanical responses of honeycomb structures under various load conditions, including tension, compression, buckling, shear, and fatigue were studied. To further improve the performance of the honeycombs, appropriate optimizations were also carried out. However, the mechanical properties of a single lattice often struggle to exceed the upper limit of its structure. This paper investigates the effect of permutation and hybrid mode on the mechanical properties of CFRCLSs by comparing five structures: rhomboid (R-type), octagon orthogonal array (OOA-type), octagon hypotenuse array (OHA-type), octagon nested array (ONA-type), and rhomboid circle (RC-type), with the conventional hexagonal structure (H-type). CFRCLS samples are fabricated using fused filament fabrication (FFF), with carbon-fiber-reinforced polylactic acid (PLA) as the matrix. The in-plane compression properties, energy absorption characteristics, and deformation behaviors of the hybrid structures were studied by experimental tests. The results demonstrate that different permutation and hybrid modes alter the deformation behaviors and mechanical properties of the structures. Taking elastic modulus as an example, the values of H-type, R-type, OOA-type, OHA-type, ONA-type, and RC-type are, respectively, 6.08 MPa, 5.76 MPa, 19.0 MPa, 10.3 MPa, 31.7 MPa, and 73.2 MPa, while the ratio of their masses is 1:1:1.10:1.52:1.66. Furthermore, hybrid lattice structures exhibit significantly improved mechanical properties compared to single lattice structures. Compared to the single structure R-type, the RC-type increases elastic modulus, yield strength, and energy absorption, respectively, by 12.7 times, 5.4 times, and 4.4 times.

Compressive Properties of Hollow Lattice Truss Reinforced Honeycombs (honeytubes) by Additive Manufacturing: Patterning and Tube Alignment Effects

Meta-honeycomb sandwich tubes: Designing, manufacturing, and crashworthiness performance

Enhanced Out-of-plane Compressive Strength and Energy Absorption of 3D Printed Square and Hexagonal Honeycombs with Variable-Thickness Cell Edges

Breaking mechanical performance trade-off in 3D-printed complex lattice-inspired multi-cell tubes under axial compression

Integrated design and additive manufacturing of lattice-filled multi-cell tubes

A Novel Hierarchical Thermoplastic Composite Honeycomb Cylindrical Structure: Fabrication and Axial Compressive Properties

Local Strengthening Design and Compressive Behavior Study of the Triangular Honeycomb Structure

Effect of plate lattice-filling on the compressive mechanical property of 3D-printed square honeycombs

Heterogeneous compressive responses of additively manufactured Ti-6Al-4V lattice structures by varying geometric parameters of cells

Mechanical Properties of a Node-Interlocking Pyramidal Welded Tube Lattice Sandwich Structure

Fabrication and Compression Properties of Ti Honeycomb

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Architecture Design of Periodic Truss-Lattice Cells for Additive Manufacturing

Fabrication and mechanical properties of three- dimensional enhanced TiAl/GH3536 hetero- honeycomb sandwich structure

In-Plane Compressive Responses of Non-Homogenous Re-Entrant Honeycombs Fabricated by Fused Deposition Modelling Manufactured

Compressive Properties of 316L Stainless Steel Topology‐Optimized Lattice Structures Fabricated by Selective Laser Melting

In-Plane Compression Properties of Continuous Carbon-Fiber-Reinforced Composite Hybrid Lattice Structures by Additive Manufacturing

Compression behavior of strut-reinforced hierarchical lattice—Experiment and simulation

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams

A Novel Hybrid Lattice Structure for Improving Compression Mechanical Properties