Abstract:In this study, to overcome the inherent hydrophobicity and improve the comprehensive performance of polyvinylidene fluoride (PVDF) ultrafiltration (UF) membranes, hydrophilic TiO2 particles were utilized to modify PVDF UF membranes. To obtain the strong binding force and homogenous TiO2 distribution on PVDF UF membranes, polydopamine (pDA) as the “bio-glue” was architecturally built between TiO2 and PVDF membranes, and the modification process was facilely designed via self-polymerization of dopamine and subsequent hydrolysis of ammonium fluotitanate. Water contact angle tests proved the significant improvement in the hydrophilicity of PVDF membranes after modification. The morphologies of various membranes before and after modification were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM) and the chemical reactions during different modification stages were evaluated by X-ray photoelectron spectroscopy (XPS) tests. It was found that the pDA layer via self-polymerization of dopamine on PVDF membranes could assist TiO2 to tightly and homogeneously bind onto PVDF surface for improving the stability and anti-fouling property of membranes because of the coordination bond (CO···Ti) formed between TiO2 and pDA, and the pore sizes of PVDF membranes obviously decreased after modifications. The possible mechanisms during modifications were discussed. The comprehensive properties of PVDF membranes after such facile modifications had been greatly enhanced according to the results of water flux, bovine serum albumin (BSA) rejection, anti-fouling performance, and TiO2 binding performance characterizations. Both the water flux and BSA rejection could be simultaneously improved at the optimized hydrolysis time. Furthermore, the static and dynamic BSA adsorption tests were carried out. Interestingly, the amounts of BSA adsorption onto modified membranes demonstrated the opposite trends for the static and dynamic BSA adsorption tests. The possible reason was clarified based on the competition between the improved hydrophilicity and the adsorption ability of TiO2. Therefore, TiO2 modified PVDF UF membranes developed by this novel strategy have attractive potential for water environmental remediation.

Surface Hydrophilic Modification of PVDF Membranes by Trace Amounts of Tannin and Polyethyleneimine

Porous poly(vinylidene fluoride) membrane modified with hyperbranched poly(amine-ester)

Fabrication of High-Flux PTFE Hollow Fiber Membranes Through Nonionic Surfactant Infiltration Coupled with Mussel-Inspired Chemistry Coating

A Stable Anti-Fouling Coating on PVDF Membrane Constructed of Polyphenol Tannic Acid, Polyethyleneimine and Metal Ion

Inner Surface Hydrophilic Modification of PVDF Membrane with Tea Polyphenols/Silica Composite Coating

Engineering a Highly Hydrophilic PVDF Membrane via Binding TiO2 Nanoparticles and a PVA Layer onto a Membrane Surface.

Preparation and characterization of poly (vinylidene fluoride)/TiO 2 hybrid membranes

Super-Hydrophilic and Fouling Resistant Pvdf Ultrafiltration Membranes Based on A Facile Prefabricated Surface

A facile strategy to enhance PVDF ultrafiltration membrane performance via self-polymerized polydopamine followed by hydrolysis of ammonium fluotitanate

Tannic acid/ethylenediamine/succinic acid graft modified PVDF anti-pollution membrane and its application in the field of organic pollutant separation

Hydrophilic Modification and Anti-Fouling Properties of PVDF Membrane Via in Situ Nano-Particle Blending

Facile Surface Modification of PVDF Microfiltration Membrane by Strong Physical Adsorption of Amphiphilic Copolymers

Improving multifunctional properties of the polyvinylidene fluoride (PVDF) membrane with crosslinked dialdehyde-starch (DAS) and polyethyleneimine (PEI) coating

A Facile Approach to Fabrication of Superhydrophilic Ultrafiltration Membranes with Surface-Tailored Nanoparticles

Highly hydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes via postfabrication grafting of surface-tailored silica nanoparticles.

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

Surface Modification of Poly(Vinylidene Fluoride) Membrane with Hydrophilic and Anti-Fouling Performance Via A Two-Step Polymerization

Excellent Wetting Resistance and Anti-Fouling Performance of PVDF Membrane Modified with Superhydrophobic Papillae-Like Surfaces

Co-deposition of Tannic Acid and Diethlyenetriamine for Surface Hydrophilization of Hydrophobic Polymer Membranes

Antifouling modification of PVDF membranes via in situ mixed-charge copolymerization and TiO2 mineralization

Polytetrafluoroethylene hollow fiber membranes with thru hydrophilic channels for enhancing water transfer and anti-oil-fouling properties