Abstract:Purpose Prefabricated pier technology has the advantages of quick construction time, relatively little traffic interference and relatively small environmental impact. However, its applicability under earthquake conditions is not yet fully understood. The seismic performance and influence parameters of a prefabricated concrete pier connected by embedded grouting sleeve (GS) in a pile cap are investigated in this study. Design/methodology/approach Two prefabricated pier scale model specimens with different reinforcement anchorage lengths and two comparative cast-in-place (CIP) pier model specimens are designed and manufactured for a seismic simulation shaking table. With the continuous increase of input ground motion strength, the changes in basic dynamic characteristics, damage development, acceleration and displacement variation laws, and pier bottom strain responses are compared among the specimen. The finite element software ABAQUS is used to simulate the test pier. Findings The crack location of the two prefabricated pier specimens is almost the same as that of the CIP pier specimens; CIP pier specimens show more penetrated cracks than prefabricated pier specimens, as well as an earlier crack penetration time. The acceleration, displacement and strain response of the CIP pier specimens are more affected by earthquake activity than those of the prefabricated pier specimens. The acceleration, displacement and strain responses of the two prefabricated piers are nearly identical. The finite element results are in close agreement with the acceleration and displacement response data collected from the test, which verifies the feasibility of the finite element model established in ABAQUS. Originality/value A GS connection method is adopted for the prefabricated pier, and on the premise of meeting the minimum reinforcement anchorage length required by the code, this study explores the influences of different reinforcement anchorage lengths on the seismic performance of prefabricated piers in high-intensity areas. A shaking table loading test is used to simulate the real changes of the structure under the earthquake. This work may provide a valuable reference for the design and seismic performance analysis of prefabricated pier, particularly in terms of seismic stability.

Shake Table Tests of Tall-Pier Bridges to Evaluate Seismic Performance

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Seismic Response of A Multi-Span Bridge Based on Remote Testing Platform Netslab

Investigation of multi-mode seismic performance of tall hollow piers with two-node loading quasi-static test

Shaking table tests of seismic-resilient post-tensioned reinforced concrete bridge piers with enhanced bases

Study and Development on Shake Table Tests of Scaled Models of Bridge Engineering

Shaking table test on single segment prefabricated concrete bridge pier connected by grouting sleeve

Experimental study on the seismic performance of a curved bridge via large-scale hybrid tests

Shaking Table Test on Seismic Performance of Continuous Rigid Frame Bridge with Cast-in-place and Fabricated Super High Piers

Shake table test on support uplift force of long-span cable-stayed bridge under longitudinal ground motions

Shaking Table Tests of Coastal Bridge Piers with Different Levels of Corrosion Damage Caused by Chloride Penetration

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Shaking Table Test on Seismic Response of Pile Groups of Bridges in Liquefiable Ground

Shake-Table Test for a Typical Curved Bridge: Wave Passage and Local Site Effects

Quasi-static testing of railway rounded rectangular hollow tall piers having semi-hinged column-base details

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Large-scale shaking table model test on seismic performance of bridge-pile-foundation slope with anti-sliding piles: a case study

Experimental Study on Transverse Seismic Behavior of Long-Span Cable-Stayed Bridge with Two Inverted Y-Shaped Reinforced Concrete Towers

Response Characteristics of Irregular Continuous Rigid Frame Bridges with Long-Span and High-Rise Piers under Ground Motion Excitations with Different Fault Distances

Experimental study on longitudinal seismic damage progress and failure mode of a three-tower extradosed bridge

Experimental Study on the Seismic Performance of Round-Ended Hollow Piers