Abstract:The linear curve distribution of the beam and the asymmetrical layout of the stay cables may have beneficial or adverse influences on cable-stayed bridges. Sectional model wind tunnel tests and numerical simulations were used to analyze the influence of these two factors on the wind-induced vibration characteristics of a curved beam unilateral stayed bridges (CBUSB) and the interaction between its stay cables and curved beams. According to the basic similarity law, the sectional models of a CBUSB example were designed and manufactured. The aerodynamic force and wind-induced vibration of the models were measured in an atmospheric boundary wind tunnel laboratory to obtain the aerodynamic coefficient and displacement, respectively. Based on the wind tunnel test results, the verified finite element model was used to determine the displacement, acceleration, and cable tension of the CBUSB excited by the buffeting force under 5 curvature cases and 4 cable layout cases. Then, band-pass filter technology and fast Fourier transform technology were used to analyze the influence of these two parameters on the wind-induced vibration characteristics of the CBUSB. Results show that the CBUSB had good aerodynamic stability in the wind tunnel at low and high wind speeds. With increasing curvature, the high-order modal vibration and modal coupling vibration of the CBUSB may be generated. The frequency, the proportion of wind-induced vibration response components, and the distribution characteristics of spectrum energy of CBUSB will be affected by 4 cable layout schemes. Cables arranged on both sides of the bridge and near the center of curvature can improve pedestrian comfort and reduce wind-induced vibration, respectively. Affected by the interaction between cable and bridge, the cable and bridge transmit their own vibration to each other, both of which contain the response components of each other.

Shake-Table Test for a Typical Curved Bridge: Wave Passage and Local Site Effects

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Experimental study on the seismic performance of a curved bridge via large-scale hybrid tests

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Seismic Response of A Multi-Span Bridge Based on Remote Testing Platform Netslab

Influence of ground motion parameters on seismic response of a large-longitudinal-slope and small-radius curved girder bridge

Seismic response analysis of a long-span curved bridge under multi-support earthquake excitations

Study and Development on Shake Table Tests of Scaled Models of Bridge Engineering

Large‐scale hybrid test of a curved bridge considering complete boundary condition by a large spatial loading system

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

The Seismic Response Of Long Span Continuous Rigid Frame Box Girder Bridges Subjected To Spatially Varying Ground Motions

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Shake Table Test on a Long-Span Cable-Stayed Bridge with Viscous Dampers Considering Wave Passage Effects

Shaking table experimental study and theoretical analysis of the longitudinal seismic-reduced behavior of continuous-beam bridges

Sectional Model Wind Tunnel Test and Research on the Wind-Induced Vibration Response of a Curved Beam Unilateral Stayed Bridge

Experimental Study on Transverse Seismic Behavior of Long-Span Cable-Stayed Bridge with Two Inverted Y-Shaped Reinforced Concrete Towers

Seismic Resilience Assessment of Curved Reinforced Concrete Bridge Piers through Seismic Fragility Curves Considering Short- and Long-Period Earthquakes

Shaking table test of isolated continuous girder bridge model under different earthquake intensity excitation

Assessment of bridge vulnerability due to seismic excitations considering wave passage effects

Effect of Soil–Bridge Interactions on Seismic Response of a Cross-Fault Bridge: A Shaking Table Test Study