Abstract:Partially melting high-density polyethylene (HDPE) is investigated by differential scanning calorimetry and in situ Fourier transform infrared spectroscopy (FTIR) measurements. The results show that some incompletely molten crystals can be preserved in the partially melting HDPE, thus accelerating subsequent crystallization. Moreover, quantitative calculation of such incompletely molten crystals has been done based on the FTIR results. Interestingly, the kinetically enhanced crystallization results from the improved nucleation rate because of the incompletely molten crystals. Furthermore, such interesting self-nucleation originating from the partially melting HDPE has been deliberately applied to practical polymer processing, i.e., extrusion, aiming to investigate the influence of partially melting HDPE on the microstructural development and the resultant mechanical properties of the extruded products. Unexpectedly, an increment in tensile strength has been achieved in the sheets extruded from partially melting HDPE compared with that extruded from completely melted HDPE. Wide-angle X-ray diffraction and small-angle X-ray scattering results show that the crystallinity, long period, and lamellar thickness increase for the sheets extruded from the partially melting HDPE. These increases are considered to be responsible for the mechanical increment. This work opens a new gateway for applying the self-nucleating effect of partially melting polymer melt into practical processing with the purpose of preparing high-performance polymer products.

Experimental Study on Thermal and UV-enhanced Gas-Solid Chlorination of High-Density Polyethylene

Microwave Heating and Devolatilization Characteristics of Polyethylene Particles in a Fixed‐bed Devolatilizer

Studies on Nonisothermal Crystallization of Ultra–high Molecular Weight Polyethylene in Liquid Paraffin

UV Enhanced Gas–solid Synthesis of Chlorinated Poly Vinyl Chloride Characterized by a UV–Vis Online Analysis Method

Uv-Enhanced Gas-Solid Chlorination of Polyvinyl Chloride for Cleaner Production of Chlorinated Polyvinyl Chloride

Studies On High Density Polyethylene (Hdpe) Functionalized By Ultraviolet Irradiation And Its Application

Experimental Study and Modeling of Uv-Enhanced Pvc Chlorination to Cpvc Using A Gas-Solid Process

Effect of Environmental Temperature on Chemical Structure and Properties of Ultraviolet Irradiated Hdpe

Effect of Reaction Temperature on Hdpe Functionalized Through Ultraviolet Irradiation

Structure and Properties of Ultraviolet‐irradiated High Density Polyethylene at Different Environmental Temperatures

Preparation and characterization of long-chain branched HDPE by UV-induced reactive extrusion at mild temperature

Study on Structure and Properties of HDPE Functionalized by Ultraviolet Irradiation in Air and O2 Atmosphere

Effect of Ultraviolet Irradiation on Structure and Properties of Hdpe and Hdpe/Stc Blends

Effects of Irradiation on the Melting and Crystallization Behavior of Ethylene Polymers with Different Thermal History

Effect of the Reaction Atmosphere on High-Density Polyethylene Functionalized by Ultraviolet Irradiation

Study on Crystallization Kinetics of Partially Melting Polyethylene Aiming to Improve Mechanical Properties

Effects of Heating, Tensile, and High Pressure Treatments on Aggregate Structure of a Low Density Polyethylene

High-Density Polyethylene Degradation into Low Molecular Weight Gases at 1823 K: An Atomistic Simulation

Characterization of modified low‐density polyethylene by cold atmospheric pressure plasma jet treatment in the melt state

Studies on Hdpe Functionalized by Ultraviolet Irradiation and Interfacial Interaction of Hdpe/Stc Blend

Plasma-assisted Synthesis of Chlorinated Polyvinyl Chloride (CPVC) Characterized by Online UV–Vis Analysis