Abstract:CO 2 methanation involves the utilization of renewable hydrogen, greenhouse gases CO 2 as raw materials to transform them into clean energy sources in the form of methane. This procedure is of great significance for conserving energy and reducing emissions. In this study, a series of Ni/ZSM-5 catalysts with different Si/Al ratios were prepared. H 2 -TPR and XPS were employed to explore the influence of Al content on the properties of the Ni species. The adsorption properties of the reactants on the different Ni/ZSM-5 catalysts were investigated by CO 2 -TPD and H 2 -TPD. Moreover, as H 2 O is produced during the reaction, contact angle measurement were conducted to investigate the hydrophilicity and hydrophobicity of the samples. It is suggested that the ZSM-5 Si/Al ratio (or Al content) affected both Ni dispersion and catalyst hydrophilicity. The higher Al content in ZSM-5 improved Ni dispersion. However, high hydrophilicity is unfavorable for product removal, leading to poor catalytic performance. As a result, the Ni/ZSM-5 (41) sample with appropriate Si/Al exhibited good catalytic performance with CO 2 conversion of 64 % and CH 4 selectivity of >98 % at 350 °C. The CO 2 conversion and CH 4 selectivity remained at the initial level after reaction for 72 h. This indicates that the Ni/ZSM-5 (41) catalyst has excellent stability. Based on the characterization after the reaction, it can be observed that the catalyst exhibits good carbon deposition resistance and stability. Therefore, the choice of zeolite acid amount is crucial for the reaction performance. This study will provide guideline for the development of high-performance catalysts for CO 2 methanation-loaded Ni.

Catalytic Decomposition of Ammonia to COx-free Hydrogen over Ni/ZSM-5 Catalysts: A Comparative Study of the Preparation Methods

Study on the Ni Supported Catalysts Used for Hydrogenation of IPN to Produce MXDA

Na‐ZSM‐5 Zeolite Nanocrystals Supported Nickel Nanoparticles for Efficient Hydrogen Production from Ammonia Decomposition

Ce0.6Zr0.3Y0.1O2 solid solutions-supported Ni Co bimetal nanocatalysts for NH3 decomposition

CO Methanation over Ni/SiO2 Catalyst Prepared by Ammonia Impregnation and Plasma Decomposition

Ce0.5Zr0.5O2 Solid Solutions Supported Co-Ni Catalyst for Ammonia Oxidative Decomposition to Hydrogen

CoZSM-11 Catalysts for N2O Decomposition: Effect of Preparation Methods and Nature of Active Sites

Balance effect between Ni dispersion and hydrophobicity in CO 2 methanation over Ni/ZSM-5

Promoted Multimetal Oxide Catalysts for the Generation of Hydrogen Via Ammonia Decomposition

Insights into the Zn Promoter for Improvement of Ni/SiO 2 Catalysts Prepared by the Ammonia Evaporation Method toward CO 2 Methanation

Ammonia decomposition over Ru and Ni catalysts supported on fumed SiO2, MCM-41, and SBA-15

Impact of Preparation Methods on the Performance of Cu/Ni/Zr Catalysts for Methanol Decomposition

A New High Efficiency Catalyst of Co–Ni/CeO2 for Hydrogen Production by Ammonia Oxidative Decomposition at Low Temperature

Catalytic decomposition of ammonia over nitrided MoNx/α-Al2O3 and NiMoNy/α-Al2O3 catalysts

Comparative study of ZSM‐5 supported transition metal (Cu, Mn, Co, and Fe) nanocatalysts in the selective catalytic reduction of NO with NH3

Improvement of Cu/Zn-based catalysts by nickel additive in methanol decomposition

Catalytic Decomposition of N2O over Fe-ZSM-11 Catalysts Prepared by Different Methods: Nature of Active Fe Species

On the performance of Fe-Cu-ZSM-5 catalyst for the selective catalytic reduction of NO with NH3: the influence of preparation method

Catalytic Decomposition of N2O over Cu-ZSM-11 Catalysts

Two-Step, Oxygen-Free Conversion of Methane over Supported NiB Amorphous Alloy Catalysts

Investigation on the catalysis of COx-free hydrogen generation from ammonia